Jump to content
SAU Community

Recommended Posts

hi everyone, just off loading some parts i've got.

standard intercooler 1st row a bit damaged but no leaks and in good working order $50

96xm3o.jpg

front pipe 2x 2.5 inch to a 3.5. $70

tasoj7.jpg

3.5 cat back stainless steel and big tip, exhasut some japan brand (ksp) $150 (makes a gtr sound like one!)

31447r9.jpg

under bonnet insulator $50 good condition.

110vm1y.jpg

polished can catch designed to fit infront of the battery with 2 m of hosing $100

2mwc9rs.jpg

standard overflow bottle $make an offer$

2wce3qu.jpg

extreme torque spilt controller for r32 gtr and gts4 $150

1538p5u.jpg

fibreglass rear pods $30 with need to been high-filled

zx7fxe.jpg

centre console lid $30 in good condtion

9rsn41.jpg

gear boot, new leather, $40

33e4phz.jpg

g4 just jap coilovers on good condition except one stud has been cross threaded a bit.$500

nismo fuel pressure regulator used for one month.$150

all parts can be picked up from thirlmere or kingsgrove. any questions call/sms me on 0422772841 or pm.

and some can be posted ask for a price.

Link to comment
https://www.sau.com.au/forums/topic/375719-syd-r32-gtr-stuff/
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...