Jump to content
SAU Community

Recommended Posts

I have been interested in turbo's but I've never really known much about them.. I took a look at some sites around the net and it seems my list below is what an entire turbo system would be composed of. Can you guys add anything more?

Note: In general terms. This is not a skyline application. :D

Turbocharger

Intercooler

Intercooler Piping

Exhaust Manifold

Fuel / Timing Controller

Fuel Injectors

Wastegate Assembly

Blow Off Valve Assembly

Downpipe

Intake

All necessary Hardware, Hoses, and Fittings

Link to comment
https://www.sau.com.au/forums/topic/37581-is-this-turbo-system-complete/
Share on other sites

You sorta have it covered with the 'All necessary Hardware, Hoses, and Fittings' bit :thumbsup:

I'd add a decent fuel pump, upgraded air flow meter, and possibly things like cams, headwork, crank/rods/pistons, oil coolers etc depending on how suited the engine is to turbocharging in stock form and what you want to do with it. And don't forget a boost guage :D

Oh yeah, a boost controller would be good :thumbsup:

I like to steer away from thick head gaskets to lower compression, I much prefer to do it with a combination of headwork and crank, rods and pistons. There's nothing wrong with a properly designed metal head gasket, I just prefer the other way :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
×
×
  • Create New...