Jump to content
SAU Community

Recommended Posts

hii guys i was just wondering if anyone can help me im trying to convert my rear end with the gtr rear quarter panels and with the gtr rear bar which i will get from viva garage does anyone know if i can modify my nismo sideskirts to fit the rear panels and the front fenders or if i need to also get the gtr rear tailgate covers to ? i already have big wheels to fit on along with spacers ? anyone please help

Edited by sevan34

i dont know if the vivagarage ones are for the gtr conversion... i think they may not be but im not 100%

they change the look and make em wider but pretty sure not gtr

sevan: yes, the gt-r conversion is MONSTROUSLY costly, while the body parts themselves may not be overly so, the cost of fitting and spraying it is likely to double the cost of the parts, since the gt-r conversion covers almost all of the car.

I think its estimated at around 6k or so? you could do alot with 6k mate

those are also really expensive, imo if you want a body kit just get something nice that was made for a gt-t, and if you want put a bonnet made for a gt-r on, and a mole to give the front that more round and aggressive look

thanks for the help guys really appreciate it, this is my plan i wana buy the rear fenders and the rear impul rear bumper and get my side skirts modified to fit iv alrerady got monster sized wheels at 18 X 10.5 volk wheels and 38 mm rear spacers so it sits flush with the rear guards im quoted for the parts at $650 including shipping from viva garage and the guys i know quoted me $2200 fitted and sprayed (good mates of mine) is there anything else i should worry about before doing so or am i set for the job ?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...