Jump to content
SAU Community

Recommended Posts

Hi, any SAU:SA Members keen on heading over to the SAU Nationals at the end of October, please head to this members only section thread for registration info:

http://www.skylinesaustralia.com/forums/topic/375987-s-a-u-nationals-registration/

This is only open to SAU:SA Club Members at this stage, and will be opened to the public/general SAU later on. Membership has its privileges :D

Please note that there are only 10 cars per state granted entry to race at the track day at Winton, so if you are not an SAU:SA Club member, you will NOT get a spot. Entry into the show'n'shine and all the other stuff is open to everyone, and spectating at Winton and all the associated events of the weekend is free. We have a large group going over together, the more the merrier, so get on it everyone. There will be the best Skylines in Australia there (including the replica Gibson Winfield R32GTR), and some awesome competitions and prizes (some open to general public), with prizes including passenger hot laps in Seb's carbon fibre R35GTR and loads of other gear.

For anyone who has been living under a rock :

http://www.skylinesaustralia.com/forums/topic/346683-import-monster-sau-nationals-2011/

http://saunats2011.com/

Link to comment
https://www.sau.com.au/forums/topic/375988-s-a-u-nationals-registration/
Share on other sites

This should be killer!... I'm peeing my pants already about all the cool stuff that will be there!! :thumbsup:

If you are thinking about heading over tho folks best get some accommodation sorted out ASAP as the rest of Aus will be doing the same...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...