Jump to content
SAU Community

23Rd Oct - Happy Laps And Motorkana Combo Oct.


Recommended Posts

Spent a couple of hours this morning with the qr management and we have agreed to running this event.

When....Sunday Oct 23rd

Where....Qld Raceway

Time....7 a.m.

The day will begin with happy laps session on the track at qr followed by a breakfast all inclusive in the price.

This event is open to members and non members alike with pricing TBA but usually around the 30 dollar mark for a breakfast h/l session.

After Breakfast qr will host a motorkhana for the club. This event will initially be open to members only as there is a limit of 20 cars. Should we not be able to fill the book we will take non members on a first come first served basis.

Price for this event will be around the 60 dollar mark making it a bargain for those keen to try their hand at m/k

I will confirm this event on Friday but I see no reason why it cant happen unless the raceway tells me otherwise.

Remember, there is a 20 car limit to the motorkana and members will be given first priority.

Lets get it rolling.

Fineline. H/l and M/K

Sneakypete H/L and M/k

Strike3r H/L

Sneki81 H/l and M/k

33eddy H/L

Brandon H/L

HR31-RB20DET H/L

Bunta H/L and M/k

Mark H/L

Waggamamma H/L

Father in law H/L

V8skylinemn H/L and MK

si H/L and M/K

Rhinorebel H/L and M/K

  • 2 weeks later...

Listen up folks. due to circumstances beyond our control the happy laps segment of this event will now be at lakeside raceway and the skidpan event is postponed until further notice

spread the word everyones.

Listen up folks. due to circumstances beyond our control the happy laps segment of this event will now be at lakeside raceway and the skidpan event is postponed until further notice

spread the word everyones.

Is it just me or does the management of QR seem to be always mucking up bookings for their clients?

Well add me in for this. i so wanted to do the MK tho :(

  • 3 weeks later...

hi guys, if its not too late can i put down a +1 for me plz... and where is everyone?

are we eating first then happylapping or lap then food, and if my +1 doesnt eat and just passengers is there still the $30(ish) fee?

Edited by mumslayer

Hey all,

Time to be at lakeside is 7:15am

If there are people interested then we can have a meeting point at the usual place; Aspley Hypermarket on the Cnr of Albany creek road and Gympie road

We will LEAVE Aspley at 7:00am so that we are at the track at around 7:15am

Anybody interested in meeting at aspley, post up so i know who is coming :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...