Jump to content
SAU Community

23Rd Oct - Happy Laps And Motorkana Combo Oct.


Recommended Posts

Spent a couple of hours this morning with the qr management and we have agreed to running this event.

When....Sunday Oct 23rd

Where....Qld Raceway

Time....7 a.m.

The day will begin with happy laps session on the track at qr followed by a breakfast all inclusive in the price.

This event is open to members and non members alike with pricing TBA but usually around the 30 dollar mark for a breakfast h/l session.

After Breakfast qr will host a motorkhana for the club. This event will initially be open to members only as there is a limit of 20 cars. Should we not be able to fill the book we will take non members on a first come first served basis.

Price for this event will be around the 60 dollar mark making it a bargain for those keen to try their hand at m/k

I will confirm this event on Friday but I see no reason why it cant happen unless the raceway tells me otherwise.

Remember, there is a 20 car limit to the motorkana and members will be given first priority.

Lets get it rolling.

Fineline. H/l and M/K

Sneakypete H/L and M/k

Strike3r H/L

Sneki81 H/l and M/k

33eddy H/L

Brandon H/L

HR31-RB20DET H/L

Bunta H/L and M/k

Mark H/L

Waggamamma H/L

Father in law H/L

V8skylinemn H/L and MK

si H/L and M/K

Rhinorebel H/L and M/K

  • 2 weeks later...

Listen up folks. due to circumstances beyond our control the happy laps segment of this event will now be at lakeside raceway and the skidpan event is postponed until further notice

spread the word everyones.

Listen up folks. due to circumstances beyond our control the happy laps segment of this event will now be at lakeside raceway and the skidpan event is postponed until further notice

spread the word everyones.

Is it just me or does the management of QR seem to be always mucking up bookings for their clients?

Well add me in for this. i so wanted to do the MK tho :(

  • 3 weeks later...

hi guys, if its not too late can i put down a +1 for me plz... and where is everyone?

are we eating first then happylapping or lap then food, and if my +1 doesnt eat and just passengers is there still the $30(ish) fee?

Edited by mumslayer

Hey all,

Time to be at lakeside is 7:15am

If there are people interested then we can have a meeting point at the usual place; Aspley Hypermarket on the Cnr of Albany creek road and Gympie road

We will LEAVE Aspley at 7:00am so that we are at the track at around 7:15am

Anybody interested in meeting at aspley, post up so i know who is coming :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...