Jump to content
SAU Community

Recommended Posts

my nissan r33 ,ive changed pod k&n fillter ,i new iridum spark plugs ,boost control to 11 psi .when i go 5000-7000rpm i sometimes get a popping noise throw exhust. Pen lugs are set at 1.1. the problem when i accelerate slower its ok . but when when accelerate full throtle at arround 5000-7000rpm i get poping.

it fills like to much air & fuel is going into the engine & coses to cut out .cars got front mount intercooler & apexi exhust.

IF ANYONE CAN HELP IT WILL BE VERY HELPFULL :wacko:

Pull the plugs out and either gap them down to atleast .8mm or buy some bkr6e pre gapped at .8mm. If this doesnt fix it u will need new coil packs.

Or u can drop the boost back down to stock

  • 2 weeks later...

Pull the plugs out and either gap them down to atleast .8mm or buy some bkr6e pre gapped at .8mm. If this doesnt fix it u will need new coil packs.

Or u can drop the boost back down to stock

new plugs iridium 1.1 all good :banana:

Buy coppers next time and gap to 0.8mm. Kristina are horribly expensive. I buy a set of copper plugs for mine for $20 and I run 18psi all day everyday. You don't need iridiums as has already been said, coppers will save you a bunch money

^ as already said before buddy, it will probably bee your ccoilpacks. Either do a refurb on them or buy some expensive splitfires. I would just do the refurb and drop the boost back until I could afford the splitfires buddy. Get a video up of it on youtube and post the link in here if your still concerned.

as already said before buddy, it will probably bee your ccoilpacks. Either do a refurb on them or buy some expensive splitfires. I would just do the refurb and drop the boost back until I could afford the splitfires buddy. Get a video up of it on youtube and post the link in here if your still concerned.<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
×
×
  • Create New...