Jump to content
SAU Community

wanted: magical importer or such.

tomj

By tomj,
in General Automotive Discussion

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

I think there is the odd one that goes for $6k for the "rubbery" landed figure.. which basically means they are free in japan (they're scrap metal to them), but then you have to add the engineering, stamp duty, registration, etc. It all adds up to at least another $1-$2k.

They are around but who knows the condition. Some look good in the photos. Not sure who is exactly buying these cars, probably noobie p-platers. Some must have landed in the country by now? Don't hear much feedback on any of them.

jake32 Mentor

jake32

Posted
Posted

mine arrives this weekend

turbo auto

sunroof,one owner 76000 log books,cruise control, grade 4 no accident`s or repairs...will owe just over $8k complied

this is about as cheap as good cefiro`s get..turbo`s anyway

the $5k cars are garbage ...scrap cars ..don`t waste your time ... get some thing decent to start with..there is some nice one`s still there

BHDave Grand Master

BHDave

Posted
Posted

If you can get one for the equivalent of about 1500 bucks then it'll cost between 8-9k landed and registered. 1500 bucks still doesn't get you much so you have to look pretty hard. The really good ones go for alot more.

But you now have the extra bullshit that was brought in a couple of weeks ago that bits of the air conditioning have to be removed before it goes on the boat so basically add 200-300 to get it here and 400 to fix the aircon when it arrives

Duncan Grand Master

Duncan

Posted
Posted

$9k was easy...is about 400k yen in jp, you can check the rest of the costs from the calculator at http://www.prestigemotorsport.com.au/

However, like I said the car was not in great condition...and I haven't had to pay for rego or compliance because its a race car. All other costs are the same tho

Duncan Grand Master

Duncan

Posted
Posted

well, the problem with the brokerage fee is they do the same amount of work no matter what the price is....would you want them to check it less thoroughly because it was worth less? All the paperwork takes just as long too :)

In any case, as long as you don't expect too much from a 15yo car it can be a great deal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • MBS206
      Could it really happen......

      By MBS206 · Posted

      Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • MBS206
      R34 25GT Engine Light 21

      By MBS206 · Posted

      Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...