Jump to content
SAU Community

Recommended Posts

need your help fellas!

Looking to purchase a polisher, deciding between the GEX125 AC Pro and 150T. i know the 150 has a polisher setting, but between the two models the specs looks around the same. i was thinking the 125 would be better for the tighter spaces when polishing.

What are your guys opinions?

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/377405-bosch-gex125-vs-gex150t/
Share on other sites

bit pricey though, i special ordered mine through bunnings - showed them the price etc for it off sydneytools and they beat it by 10% .. thats the best deal I could get it for!

I dont use any backing plate :) the FI pads fits mine just right

Yeap, as long as you mask up the rubbers well i managed to do everywhere. most machines are too big for everywhere really and you still need to give some spots a good hand polish

If you are looking for a Random Orbital that has interchangeable backing plates and more power that the GEX150T but costs $229 you might want to look at the Concours 900 Polisher at Waxit Car Care.

You can also find a range of kits to go with the Concours 900 Polisher HERE.

If you are looking for a Random Orbital that has interchangeable backing plates and more power that the GEX150T but costs $229 you might want to look at the Concours 900 Polisher at Waxit Car Care.

You can also find a range of kits to go with the Concours 900 Polisher HERE.

that actually looks pretty cool i want to try but no point having two RO's!

  • 1 month later...

I bought the 125 and then realised that it was no where near as effective at the 150T as the 150T has both the forced rotation mode (which is what you want) and random orbit. Went out and bought the 150T, as stated before Final Inspection highly recommend this unit, and it makes a big difference having a unit that can do forced rotation. I had to have the 125 held lightly against the cars surface otherwise it would bog down and just vibrate on one spot.

having struggled with an old Bosch RO only and then upgrading to a 150T, forced rotation is DEFINITELY the way to go.

a few friends have gone to Rotaries and didn't find them as scary as they thought. Obviously need to be more careful, but they said they're soo much quicker again of their prev units (Rotex jobbies $$$) - depends how serious you think your hobby is going to get :D

scr34min order it from bunnings, if you show them the price of it from sydneytools bunnings will beat it by 10% .. :D

thats what i did

also im in perth as well ... with a gex150T + pads + polishes sitting around ..

i do need to order the heavy cutting pad/polish still though

ive only got medium and extra fine ones atm

if you need any help or anything let me know :)

i have exams real soon but after that I should be quite free ...

^ i got mine for about 350 ..

no pads though

but from melb you'd have to pay delivery and whatnot ...

about the same really hahah

if you go down the bunnings route

http://sydneytools.com.au/shopexd.asp?id=1243&bc=no

show them that :)

oh yeah, i remember paying around $360 now that i think about it....

but still, $50 worth of pads in there, plus whatever was postage on them.

but yeah, probably the best deal for Melbourne ppl

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...