Jump to content
SAU Community

Recommended Posts

need your help fellas!

Looking to purchase a polisher, deciding between the GEX125 AC Pro and 150T. i know the 150 has a polisher setting, but between the two models the specs looks around the same. i was thinking the 125 would be better for the tighter spaces when polishing.

What are your guys opinions?

Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/377405-bosch-gex125-vs-gex150t/
Share on other sites

bit pricey though, i special ordered mine through bunnings - showed them the price etc for it off sydneytools and they beat it by 10% .. thats the best deal I could get it for!

I dont use any backing plate :) the FI pads fits mine just right

Yeap, as long as you mask up the rubbers well i managed to do everywhere. most machines are too big for everywhere really and you still need to give some spots a good hand polish

If you are looking for a Random Orbital that has interchangeable backing plates and more power that the GEX150T but costs $229 you might want to look at the Concours 900 Polisher at Waxit Car Care.

You can also find a range of kits to go with the Concours 900 Polisher HERE.

If you are looking for a Random Orbital that has interchangeable backing plates and more power that the GEX150T but costs $229 you might want to look at the Concours 900 Polisher at Waxit Car Care.

You can also find a range of kits to go with the Concours 900 Polisher HERE.

that actually looks pretty cool i want to try but no point having two RO's!

  • 1 month later...

I bought the 125 and then realised that it was no where near as effective at the 150T as the 150T has both the forced rotation mode (which is what you want) and random orbit. Went out and bought the 150T, as stated before Final Inspection highly recommend this unit, and it makes a big difference having a unit that can do forced rotation. I had to have the 125 held lightly against the cars surface otherwise it would bog down and just vibrate on one spot.

having struggled with an old Bosch RO only and then upgrading to a 150T, forced rotation is DEFINITELY the way to go.

a few friends have gone to Rotaries and didn't find them as scary as they thought. Obviously need to be more careful, but they said they're soo much quicker again of their prev units (Rotex jobbies $$$) - depends how serious you think your hobby is going to get :D

scr34min order it from bunnings, if you show them the price of it from sydneytools bunnings will beat it by 10% .. :D

thats what i did

also im in perth as well ... with a gex150T + pads + polishes sitting around ..

i do need to order the heavy cutting pad/polish still though

ive only got medium and extra fine ones atm

if you need any help or anything let me know :)

i have exams real soon but after that I should be quite free ...

^ i got mine for about 350 ..

no pads though

but from melb you'd have to pay delivery and whatnot ...

about the same really hahah

if you go down the bunnings route

http://sydneytools.com.au/shopexd.asp?id=1243&bc=no

show them that :)

oh yeah, i remember paying around $360 now that i think about it....

but still, $50 worth of pads in there, plus whatever was postage on them.

but yeah, probably the best deal for Melbourne ppl

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...