Jump to content
SAU Community

Recommended Posts

Hey guys, I just bought a set of Rays LMGT2 wheels and I want to fit them to my R33 GTST.

Specs:

Rears: 17 x 9 unknown offset? (sticker was removed) with 245/45/17 tires

Fronts: 17 x 8 +38 (they didn't clear my R33 calipers) with 225/45/17 tires

Now im looking at buying bolt on spacers all around. I have my Rear guards rolled and flared already, the Front guards are rolled only. The car does sit pretty low and i was wondering would 15mm or 20mm Spacers would be ok without scrubbing?

the look im after is making the wheels stick out the guards a bit all around.

post-63786-0-39916700-1316423732_thumb.png

I'm using 25mm front and rear on a 33 GTS T using 34 GTT rims with 245/45 17 rubber, I just used a ruler to work out the size and got one pair to trial fit, they fit just inside the guards, no rubbing anywhere, my ride height is 350 front and 340 rear.

Bolt on hub centric from Just Jap.

I recommend using locktite on the nuts and bolts on the spacers and torqueing them up tight.

Just saw you have the front 38 so you can go 20 or 25 on the front. If you run camber on the front go 25 if not can go 20 to be safe. I run camber on my front and have 20 mm spacers with same size rims and they sit slightly out of the guards

Thanks for the replies guys, I ended buying 20mm spacers all around.. im very happy with the front, I got the look im after, no scrubbing either. At the back... it looked awesome! but scrubbed on the guard :( Now im thinking of raising the car up at the back so i can fit the spacers, because i just fell in love more with my wheels when they stuck out the guards lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...