Jump to content
SAU Community

Recommended Posts

Hey guys,

Selling this car as I do not have the funds to fix it.

Only the rear end is damaged so the engine and front is fine. Engine in good condition, only done 7,8000km.

Interior is in immaculate condition.

Mods:

- Front mount intercooler

- HKS 3inch cat back

- Vented bonnet

- 18inch rims

- A pillar double guage holder

- Tein suspension

- BOV

- Boost controller

I prefer the car to be sold as a whole as I dont want random parts all over the place. $3000

Otherwise pm me for parts and prices,

Cheers

post-83804-0-68554000-1316778917_thumb.jpg

post-83804-0-54953900-1316778929_thumb.jpg

post-83804-0-22179600-1316778941_thumb.jpg

post-83804-0-76932000-1316778958_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/378085-r33-gtst-for-the-wrecking/
Share on other sites

i know you dont want to part it out but please please please please - can i buy the driver seat lever to recline the seat off you?

I'd take the bonnet off you too if you want to swap a white stock series 2 bonnet for it..

Hey all. This is now in my garage. If you want anything let me know. Il do up a post once I get a chance to work out what's worth what and what's not damaged.

Cheers!

Sorry mate. I messaged all the others. The lever I have is painted to suit the rest of the seats so I don't want to separate. It's also a s1 do the hood won't for your s2.

Anything else u need? It's a 94.



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...