Jump to content
SAU Community

Recommended Posts

damn, pity I didn't see this thread earlier, could have warned you off them...

Anyway, for people searching in the future, I'm running 18x11 +18 and they touch the suspension upright before full lock, so not ideal. I'll probably try and get some 5mm spacers to just get them out far enough to clear, but they're pretty much flush with the guards as is.

Does look good though.... :D

Any pics :D

Wheels are now on properly

Wheel specs are

Front: 19 x 11 ET15

Rear: 19 x 11 ET25

295/30/19 Yokohoma Advan V103 tyres all round :)

DSC_4383.jpg

DSC_4384.jpg

DSC_4385.jpg

DSC_4386.jpg

DSC_4387.jpg

DSC_4388.jpg

Next tyre change I'm gonna drop it down to a 285 tyre to give me a bit more clearance, Coilovers to come in the new year along with a probable arch roll and Z-Tune front wings to give even more movement :)

I know it needs centre caps - I just cant find any I like & I know the silver nuts looks silly but I've got some black ones due anytime from Adam @ Z1

Proper pics to come over the weekend assumming it stops raining at some point :rolleyes:

That looks awesome :wub:

How much are you lowered by? Have you had to roll the arches or remove the guards? What tyre size?

Thanks!

Ride height is355mm from centre of wheel to wheel arch and the tyre size is 295/30/18. I haven't had to roll the guards at all but then again the cusco suspension is pretty firm and I don't think I've managed to get that much compression into the springs. A track day may change that though...

Also Ian, love those RE30s - they're one of my other rims of choice. But as everyone else is saying - needs more low!

Then again, if it's your daily, would make sense not to drop it - My heart is in my mouth every speed hump and dished road crossing

Front track is wider than rear?

In pictures, the rims are so flat. Can't see much of the re30 :(

Looks great though.

At the moment yeah. I'll see how it goes with them set up like this and go from there :)

Thanks!

Ride height is355mm from centre of wheel to wheel arch and the tyre size is 295/30/18. I haven't had to roll the guards at all but then again the cusco suspension is pretty firm and I don't think I've managed to get that much compression into the springs. A track day may change that though...

Thats just what I wanted to hear :D I'm also running 295/30 and planning for Cusco coilovers (Had them on my 350Z and they were epic!)

Looks great Ian. Do u have plans 2 lower it?

Yup, lowering will be next. I'll take the car off the road over winter and get it ready for summer (coilovers, hardpipes and a few carbon touches ;))

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...