Jump to content
SAU Community

Recommended Posts

Volk racing Rays F-Zero Challenge forged rims.

Sizes are:

18 X 10.0 +48

18 X 9.0 +45

Comes with 255/40/r18 and 235/40/r18 Federal 595 RS-R tyres. Tyres are very new, have only done a about 1,500km on them.

Unfortunately there are a fair few scratches on these wheels. Nothing a powder coat couldnt fix though. Structurely they are fine.

$1300 ONO. (I recently paid 950 for the tyres alone and they're nearly new, so you're basically getting some volks for 350 bucks!)

(Photos of these in this thread: http://www.skylinesaustralia.com/forums/topic/370180-fs-volk-rays-f-zero-challenge-rims/page__p__5903534__fromsearch__1#entry5903534 )

R33 GTS-S Springs. I have a feeling they're not stock height ones.. might be a little stiffer than normal too. They were already on my car when i bought it. The uncompressed

heights are; Fronts - 330mm, Rears - 350mm. (Or the other way around..)

$100.

Bosch 040 High Capasity Fuel Pump.

Brand new, still in plastic bag and box. I paid $199 for this on JustJap.com and never used it.

$150.

ProjectMU HC+ Racing pads for R33 GTS-T calipers.

These are second hand, although have only been on a car for about 1,500kms. A few km of which was a deca. Still like new. Apparently just the fronts price at $350 new.. A full

set of fronts of rears which are only barely used for sale.

$300.

Aftermarket front and rear swaybars for a R33 GTS-T.

Not exactly sure what brand they are. There's a sticker on them that says ARC. Didnt think ARC made swaybars... They are deep purple in colour if that helps.. Anyway, Rear

swaybar is adjustable, Front is not. Comes with links and rear bushes, bushes for the front will need to be sourced as this swaybar is a fair size thicker than the standard

swaybars.

$300.

3" Stainless steel Blitz NurSpec cat-back exhaust for R33 GTS-T.

It's looking a little scratched and discoloured now, still works fine tho. It's very loud though just a warning.

$350.

3" Stainless Steel front pipe for R33 GTS-T.

Was supposed to go on along with an Invidia cat back exhaust i had which i didnt end up using. In good condition.

$100.

Brand-less De-Cat pipe for R33 GTS-T.

$50.

(If you want to pick all of the above exhaust pieces at the same time i can do a bit of a discount.)

Nardi Torino Steering Wheel.

$100.

R34 GTT factory intake pipe.

$40.

Modified R33 GTS-T intake pipe.

Has the middle cut out and a 3" metal pipe in it so as to stop it sucking shut under high suction.

FREE!

Apexi Pod Filter.

It's a little bent, nothing too distic though, highly doubtful has affected the performance of it.

$40.

Blitz mesh Pod Filter.

Unless it's a copy, JustJap has them for a whopping $395! (what the...)

Yours for $40!

Exhaust Shop made 3" rear muffler for R33 GTS-T

$50.

Crappy rear muffler for R33 GTS-T that silences the bollucks out of a 3" system.

FREE!

Factory R33 GTST front and Dump pipe.

FREE!

I think that's pretty much it.. I will be constantly updating the thread for anything i've missed/price changes. I'm open for offers as well.

Names Andy, i live in the eastern 'burbs of melbourne. Number is 0434145894 if you have any questions. I would highly prefer pick up as i'm a bit too busy to be sourcing

bubble wrap and boxes in my spare time but will sort something out if need be.

Photos will be up in the fullness of time. If you'd like some photos now just send me a txt and i'll MMS you something.

Happy shopping!

Link to comment
https://www.sau.com.au/forums/topic/379109-r33-garage-cleanout/
Share on other sites

The Decat has iodized a bit but I can always give it a scrub for you. No cracks or holes tho. Came with a 33 gtst xaust system I bought so in theory should bolt straight up. I'll have a better look when I finish work.

Also I'm bot splitting the wheels sorry

The Decat has iodized a bit but I can always give it a scrub for you. No cracks or holes tho. Came with a 33 gtst xaust system I bought so in theory should bolt straight up. I'll have a better look when I finish work.

Also I'm bot splitting the wheels sorry

Cheers mate let me know

Well, the flange angles don't quite match up to cat on my car at the moment.. altho if i peice together the other exhaust peices i have it seems to match, i might just have a weird dump/front pipe i'm not sure.. either way you can come and have a look at it in person if you like..

Updated price list:

(See above for details. Parts not in this list that are in the above list are sold, obviously..)

R33 GTS-S Springs.

$80.

ProjectMU HC+ Racing pads for R33 GTS-T calipers.

$250.

Aftermarket front and rear swaybars for a R33 GTS-T.

$250.

3" Stainless steel Blitz NurSpec cat-back exhaust for R33 GTS-T.

$300.

3" Stainless Steel front pipe for R33 GTS-T.

$80.

Brand-less De-Cat pipe for R33 GTS-T.

$40.

(If you want to pick all of the above exhaust pieces at the same time i can do a bit of a discount.)

R34 GTT factory intake pipe.

$25.

Apexi Pod Filter.

$35.

Blitz mesh Pod Filter.

$30.

Exhaust Shop made 3" rear muffler for R33 GTS-T

FREE!

Crappy rear muffler for R33 GTS-T that silences the bollucks out of a 3" system.

FREE!

Factory R33 GTST front and Dump pipe.

FREE!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...