Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

yer my 32 with 25 would happily rev at 7800 at 270kw with my 4kg aloy fly wheel with the same turbo set up as simon-r32

the t67 on a 20 might not be to good haha but i have been thinking about it

Ifraz (sp) makes 640hp at the wheels with his RB20. Pretty sure it has standard rods and yes RB20's will do 9k every day. Even with standard rods mine didn't fail until the oil pump finally let go. It saw 9k rpm most of the day for 18 months. Put in some rod bolts and it will survive.

If you want to rev to 10k + I would get a forged crank for a 26 and do up the Neo engine with a 2.8 stroker. 290 - 310 degree x 10.5mm lift cams and all the supertech gear in the head.

It will swallow babies but it will sound like an FA-18 on take off.

iv pulled down a few 20s and 25s its seems to be no proplem to install a 20 crank and rods in a 25 block

so a shorter stroke and a comp ratio of around 7:1, but i could get the block decked to bring pistons back to level

My only advice would be to wear protection.

If you are going to hang your dick out the window, which it sounds like that is all you want to do, don't be upset when the guy with the better setup passes you sideways

My only advice would be to wear protection.

If you are going to hang your dick out the window, which it sounds like that is all you want to do, don't be upset when the guy with the better setup passes you sideways

LOL best post this year.

The most insane RB track car I've ever heard, as well as a large amount of guys from the drifting in melbourne was powered by a stock RB25.

Of course if it had 290 degree cams and a smaller stroke crank with custom rods and pistons it would've been better

Panik hands down for me, best sounding RB I have ever heard :)

Sounds similar to the car Steve speaking about. Not sure which i prefer, hard to get the exact from video but having seen the other car in person it was certainly the winner. Best I've heard in 10 years!

Stock 25 head, 3ltr, 6boost manifold with a gtx35. Not sure of the gate/exhaust combo etc.

Sound is as much to do with the manifold, exhaust, gate size, angle/length of screamer as it is RPM anyway.

You could rev to 9000rpm and it could sound shithouse.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks, I'll shim that plug and hopefully it fixes it.  Yes still factory turbo for now, still have the misfire it's not as bad but still noticeable 
    • I had someone check the CU, they said it was fine but it could be buggered  I was only running around 7-10 PSI on the dual stage controller, but my boost gauge is shit house and needs replacing so I'm not getting a true reading.  Then I ran from wastegate pressure as per Turbosmart but still have the same sort of issue 
    • Yeah this is a thing. I've had mine setup like this for a few years now, works fine. If I dredge my memory bank, I think I had to do this after I removed my factory dash.  So you've tried it on gate pressure, I'm assuming this is the factory turbo? Did you still have misfire issues with that setup?
    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
×
×
  • Create New...