Jump to content
SAU Community

Building My R34 Gtt

Pearsy17

By Pearsy17,
in Engines & Forced Induction

 Share

Recommended Posts

Pearsy17 Contributor

Pearsy17

Posted
Posted

h,

i iv got a 1998 R34 GTT that i bought a little while ago and im starting to get bored of its power so i wanna make it faster!

Only problem is i dont no wot i should b doing first to get the greatest bang for my buck!! At the moment im thinking a decent boost controller, new ecu?? not really sure wot esle to do

i have a 3" exaust system and a hybid intercooler and the rest of the car is stock!!

any small change i could do myself would b handy too such as gaping sparkplugs n things like that.

If someone could give me some info on wot i should do i would greatly appreciate it!! and if you know rough prices that would b a great help!!

Link to comment
https://www.sau.com.au/forums/topic/379829-building-my-r34-gtt/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Please have a good read of this thread:

http://www.skylinesaustralia.com/forums/topic/45218-what-should-i-get-first-fmic-boost-controller-dump-front-pipe/

Has plenty of money spending options to get you on your way to more power. Tis a bit old, but one of the best!

Also ensure you have a read of the RB25 dyno thread to see what other mods people have done to get to certain power targets.

http://www.skylinesaustralia.com/forums/topic/55845-rb25-turbo-upgrade-all-dyno-results/

Buy yes, upping boost is a good idea - as is a FMIC and ECU (all together really).

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...