Jump to content
SAU Community

Just Wanted Confirmation On Clutch For Rs4 S

sturb25

By sturb25,
in Four Door Family & Wagoneers

 Share

Recommended Posts

darrinspencer Grand Master

darrinspencer

Posted
Posted

Im buying a new clutch for my Series 2 RS4 S and just wanted to confirm at that it is the same as an R34 GTT pull type clutch 250 x 25.5 x 24

It will fit

I personally would at least go a R33 GTR as it has a higher clamp pressure

Esp because of the 1800kg stagea.

darrinspencer Grand Master

darrinspencer

Posted
Posted

its r34 gtt/gtr and also r33 GTR clutch that should fit. also isnt the rs4s a heap lighter than 1800kg? mine was put on a scale and returned 1602kg with 1/4 tank of petrol.

1600 or 1800kg doesn't really matter. The extra 200-300kg and AWD is the killer over a lighter RWD is the problem

I have had to change my clutch twice. First one was 3200lb and died after one trip to the drags. I now run 4200lb clamp pressure and carbontec plate, 50% more then a stock GTR (approx 2800lb?) clutch. No slip now

R34 GTR clutch is not exactly the same.

Bronx Mentor

Bronx

Posted
Posted

either way its a brick, agreed. my clutch is starting to slip slowly, i dont know if its standard or aftermarket yet, but was running 220kw pretty well.

i thought the r34GTR clutches did fit in the gearbox, except for certain triple-quad plates that had trouble fitting.

atomaly Rising Star

atomaly

Posted
Posted

everytime I go to my mechanic.... for the last 2 years.... "your clutch is really thin... u will have to replace it soon" haha whistling.gif

well its lasted til now, and I still haven't noticed much difference..

Pft shh 89 Collaborator

Pft shh 89

Posted
Posted

what's the pricing on clutches?

I bought a exedy heavy duty organic clutch, and got it fitted for $1200. Through the only shop here that would touch an import. Don't know if that's good or not, but given they were the only one who would touch it, they probably price gouge a little bit.

Pft shh 89 Collaborator

Pft shh 89

Posted
Posted

I recommend against the exert heavy duty organic, only rated to 376kw and slips like a whore.

at the moment mine is basically stock, but clutch holds really well, mind you as i say it is very new. has held up to a few hard launches so far.

  • 3 months later...
Stooge007 Rising Star

Stooge007

Posted
Posted

in the next couple of months, im going to save up for a SPEC clutch so i can do a review on them and let yall know how they really are. will be opting for a SPEC super twin plate

did you end up getting the SPEC clutch?

cost?

i'm looking for something to replace the stock clutch, no planned mods/upgrades, car (RS Four S) is stock

Bronx Mentor

Bronx

Posted
Posted

havent had enough money yet to get my one. mate of mine got a stage 3+ from spec and hes running 340kw thats single plate, no clutch slips.

even done a handful of clutch dumps from 7000rpm. still holding strong.

Jezboosted Community Regular

Jezboosted

Posted
Posted

everytime I go to my mechanic.... for the last 2 years.... "your clutch is really thin... u will have to replace it soon" haha whistling.gif

well its lasted til now, and I still haven't noticed much difference..

Out of curiosity - How does he know this ? What, everytime you go there he seperates your gearbox from the engine to see how much meat is left ? or does a simple clutch dump with revs which will fry even a new stock clutch ?

Mine slipped when i first bought the car with over 3500rpm and a soft dump of clutch. I have had it for over 2 years and still have not replaced it ! (and i don't drive like a granny either :D)

Bronx Mentor

Bronx

Posted
Posted

this is making me think if mine is stock, i have never had my gbox off, but i have clutch dumped in awd from 7krpm and it slipped quickly but grabbed right back.

aftermarket anyone?

darrinspencer Grand Master

darrinspencer

Posted
Posted

I had a stock R33 GTR clutch rebuilt by Jim Berry (Race Clutch) to suit 300RWKW and it died after taking it to the drags with approx 8-9 hard launches with 240rwkw. Pressure plate was approx 3000lb, organic plate

It did slip at drags and no tyre spin

Had the clutch rebuilt again to 4200LB with Carbonic sprung puck plate. No slips at all at drags with 260rwkw

Went well all day and dropped 1/2 sec, but had major first gear wheel spin. Used it for the last 4 months. Was meant to be good for 400RWKW.

Last week, dumped it, 1st and 2nd..........now it won't change gear at all now.

Clutch related problem and yet to pull gearbox out and find out what went wrong.....

Cost of each rebuild is approx $850. Need to find a better solution...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...