Jump to content
SAU Community

Recommended Posts

Starting Point

2011-07-12%2B09.18.59.jpg

2011-07-12%2B09.19.11.jpg

2011-07-10%2B14.01.11.jpg

She looks heaps clean there, but she has been so abused it's not funny. There was a massive amount of camber in the front right, and we've managed to reduce it to around -4.6. Unfortunately, the left looks like it's on a massive angle too, i think. I don't look at the car heaps, she kind of sits at home ><

Anyways..

New Suspension

First things first; go lower, go harder. I thought it was running compressed stock springs because everything was squeaky and felt like shit. The body roll was a bit of a problem as well as it was causing a little bit of understeer.

Turns out it had king springs, so it was *too* bad... btu still, out with the old, in with the new. Pedders Extreme A coil-over suspension went straight on, and I was scraping out of blacktown pedders in no time.

281852_2129282986197_1069621960_2459571_2916645_n.jpg

Here's a picture of me tucking 17" rims.

It only rubbed when i hit the brakes going down a steep hill and i turned at the same time... so really it never rubbed. LIfe was good.

Brakes

The brakes were next on my list because the disks were warped and the thing stopped like shit.

I was going to fork out $1400 for slotted rotors all round and better pads from Pedders, but luckily they didn't have any in stock. That saved me heaps.

Because of this, I ran over to Skyline Spares and collected myself all the gear for a 5 stud conversion, giving my GTST brakes (upgraded to four pistons at the front, bigger rotors, bigger calipers).

I decided to do this myself because, like the topic title says, I wanted to learn more about the car.

I haven't got much photos, but after three weeks, lots of swearing, lots of head banging, and two split-pin screw things later... I FINALLY got it done.

Because it went so over time, I had to take it to a mechanic to get him to bleed the brakes, because I jsut don't get time to do it with work and such, and I needed the car within a couple days after completing.

The brakes need a rebleed, i'll be doing that soon. I'll get a mate to help me in exchange for helping change his rotors :)

Here's the finished product, with the BBS rims I bought from Skyline Spares.

2011-09-17%2B14.54.09.jpg

Why the stockies on the rear?

Like a true p-plater, I decided to go take this thing out sliding... Turns out the rear diff is f**ked and it's doing onesies... meaning drifting can only be done in the wet... Sigh.

Oh, and yes, i did this off public roads.

You can also see from the above pic how tucked the front wheels are.. it's not too much but because the tyres are a lot thicker than my last pair, they're scrubbing a whole lot.

I'm going to roll the guards up when I get a chance.. just need to borrow my mates jack again... :(

And it's not pack up time at work.. So I'll update the thread tomorrow when I'm back at work :)

Link to comment
https://www.sau.com.au/forums/topic/380001-p-platers-learner-car-33-gts/
Share on other sites

My mate has driven EF and AU falcons with open diffs and can get them sideways in the dry. He is crazy though, just reefs on the wheel at 80+ then countersteers, lol.... Nice little project man, wish I had an import on my P's. I get my opens in December though, so there's time for that ;)

My mate has driven EF and AU falcons with open diffs and can get them sideways in the dry. He is crazy though, just reefs on the wheel at 80+ then countersteers, lol.... Nice little project man, wish I had an import on my P's. I get my opens in December though, so there's time for that ;)

The falcons go sideways alright.. my gfs cousin had one with a locked diff and it went sideways on command. Problem with my liner is it's only peg-legging atm, so when I try to drift in the dry the bastard kinda squats and you can hear the power going to the diff, and stopping at the diff (thats what it sounds like anyway).

that's the next thing to hit on my list (right after I fix up the sub in the rear, and get the new fusion speakers in... oh and save the 2k i need for a frekaing diff -.-)

And trust me, you don't want an import car on your Ps. Crap fuel consumption, combined with no power and bad rep from cops... no real point until you're on your fulls. In a way, I wish I sold my old pristine N/A R33, kept my African American (black r32 gtst) and just played with that... ahh well.

Good luck with your fulls... You must be feeling so anxious now it's so close :P

Gonna try photodump when I have the time :) Got some cool shots.

Nice to see someone else on there green ps waste money on there skyline like im doing haha makes me not feel as stupid hahaha how much you pick up the 5 stud conversion at..... Sucks about your diff thank god mines lsd

  • 4 months later...

Haha not the only one mate, i seem to be throwing money at the 34 at the moment haha.

Nice to see someone else on there green ps waste money on there skyline like im doing haha makes me not feel as stupid hahaha how much you pick up the 5 stud conversion at..... Sucks about your diff thank god mines lsd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...