Jump to content
SAU Community

Recommended Posts

selling these coz they are a bit overkill for a drift car :lol:

these are the old school GREX/greddy upgraded brakes made by alcon (before greddy started using Taiwanese calipers)

they come with mounting brackets, shims, etc and will bolt up to any silva/cefiro/laurel/skyline that uses a 12mm bolt to mount the caliper. they come with braided lines to suit a R33 (possibly r32?) and could be easily adapted to suit a silvia.

the rotors consist of custom made hats to accept a AP racing 343x32 rotor (which is practically new)

brake pads are unknown brand, but still have 10mm of meat and have 'competition use' stamped onto them.

they are freaken light and can fit under the right 17s, they are pretty grotty as they have been sitting around for a few years

chasing $3000. can deliver no worries.

2011-09-17134135.jpg

2011-10-14103821.jpg

2011-10-14103807.jpg

2011-10-14103717.jpg

2011-10-14103604.jpg

2011-10-14103548.jpg

2011-10-14103520.jpg

Link to comment
https://www.sau.com.au/forums/topic/380152-alcon-343mm-front-brake-upgrade/
Share on other sites

err. i have seen brembos in the same 'condition' go for $1500. they are pretty much new pads, and rotors. everything else is just dirty

don't get me wrong i'm open to offers. but not lowballers.

I agree with the commander, and the 'condition' is just brake dust, assuming they've been drained, flushed with metho and stored in a dry environment they would be good still... even if they had'nt they stand a good chance. Having said that my opinion is $3k is a little high and $1800 - $2200 ( which I would pay if I was cashed up for it ) would be a good buy considering the rotors and pads are in with the deal.. my 2.2 cents ( GST incl. ) also free bump

Edited by partyboy73

cheers man, they have been sitting on a wreck in the shed for about 2.5 years. they worked fine driving in and out of the shed. no leaking or anything like that.

gotta remember these were originally sold with a 335mm rotor. the previous owner couldn't source new rotors to suit, so has new hats mate to suit a common AP rotor that is easy to source. that alone cost more than fly355s offer

Can you measure up the rotor again? Looking at this pic of the caliper mount, it appears as though there is a silver bush between the mount and the caliper, suggesting to me that the kit has more likely been modified to go from a 332mm rotor to a 355mm rotor. OR they were originally a 332mm kit and now run the larger 343mm rotor. Though to my eye the size of the mount suggests to me they are a 355 adaptor, and if those Regamasters are 18" then thats about all the clearance you would get with a 355mm rotor under that rim (I say that because my old Regas did not clear F40s on a 340mm rotor)

Either way they are a durable brake kit.

2011-10-14103807.jpg

Hey guys,

They are definately 343mm rotors, and they are spacers under the caliper mounts. They were modded from the 332 to 343 because they guy said he couldnt source new grex rotors so he opted for AP 343mm ones.

And the Rega's are 17's, calipers cleared by 4-5mm.

CP3581-542G8 is the part number on the rotor. according to google that is a 343x32 rotor.

OR they were originally a 332mm kit and now run the larger 343mm rotor.
pretty sure this is the case.

price drop the $2500 anyways whistling.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...