Jump to content
SAU Community

R32 Gtst Running Rich

040122

By 040122,
in General Maintenance

 Share

Recommended Posts

040122 Collaborator

040122

Posted
  • Author
Posted

well i did a oil seal on my turbo , after putting the new one on cleaning all the oil out of my intake pipes, i cleaned the amf sensor, and soon as i went around the corner and hit boost the the car started spittin black smoke and runnign rough, I cheacked all sensors and borrowed a few off a mate, every sensor was great, i didnt check the cooling temp sensor, so i did research asked about , if the cars cold and i drive it and let idle idles great until car warms up. ( only take 30 seconds if that ) any ways i took the punt and yes it was the cooling temp sensor, the cooling temp sensor reads the car engine temp, any ways when they are f**ked they read a nutral degree ( zero) and as ypu wopuld all know a car engine is a lot hotter lol, so they cts is telling the computer to pump fuel in to make it combust to make the engine warmer,

wheres the cooling temp sensor ??

RBish Collaborator

RBish

Posted
Posted

the ecu only receives input from the o2 sensor once the system reaches operating temp. if the sensor is dodgy its gonna run rich, if you unplug it it will run rich so i dont see the point in that test.

get the car to operating temperature hook up a voltmeter to the sensor, a working sensor should fluctuate between 0-5v.

,but could be dodgy injecor, leaky injector seal, dodgy fpr, dodgy maf, temp sensor, vac leak boost leak, dodgy wiring.

040122 Collaborator

040122

Posted
  • Author
Posted

would taking it to a tuning place help or would it be worth trying to find the fault myself ? so far ive spent 600 on splitfires after cartoys said thats what the problem was, i dont want to replace all the sensors in my car before finding the problem and thousands later. Im under the impression that they can hook their computers up n find the faults quickly but i dunno

  • 2 months later...
040122 Collaborator

040122

Posted
  • Author
Posted

hey ive just bought another stock o2 sensor, im confused because i have a stock dump pipe and the original o2 sensor is factory yet my replacement o2 sensor is the same as my old one in every way BUT the thread on the new one has a much smaller diameter than my old one so it just drops in the hole and cant be tightened, anyone heard of this before ??

040122 Collaborator

040122

Posted
  • Author
Posted

the new one and the old one are identical in shape and size, the plug is also exactly the same but i'd say that there's bout 5mm difference in the thread diameter.

the replacement which is too small to screw into my dump pipe says NGK 205 JAPAN on it, below that on the nut, it says 2E21.

cant see what the old one says on it because it's in the car n i can only ever undo it with a rattle gun

Moodles2 Grand Master

Moodles2

Posted
Posted

R32s take a sensor with 12mm thread, R33s and beyond take 18mm threaded sensors. It's possible you either have a stock dumppipe from a R33/R34 or it's an aftermarket dump that looks stock?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
×
×
  • Create New...