Jump to content
SAU Community

Recommended Posts

if you return the BOV to stock catch cans are ok if they don't vent to atmosphere

but yeah if you don't care about the possibility of getting defected then yeah get the GT3076

from memory it is about $80 for a power run

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

f**k thats not bad. My old tuner for my ford was free for dyno runs ;)

Ha this vents to atmo

Bov has two settings for plump back at atmo

Eitherway cars off road in 12days try my luck at the track get used to it.

But yea just wanted to see what i could push through it last it had 3inch dump n shitty 2.5inch cat n shiity cat back, now its full 3.5 ;)

Then as always build the car the way i want it

The guys at Jaustech and also simon at morpowa are great as well, Heard good things about willall but I have never used them personally. I don't like boostworx as shaun doesn't use ANY knock detection when tuning, if you had a failing fuel pump it would almost certainly result in a popped motor.

I've also had 2 tunes from him that detonated as soon as the weather got above 25c and needed timing pulled out as he set the knock map to be identical to the normal fuel map.

He also doesn't do a road test/tune touch up nor does he test the cold start functionality, every tune I had had to go back to get him to fix the cold start.

Edited by Rolls

Yep rang up said same shit id probs have round the 220rwkw

But il find out friday afternoon ;) 60bucks for a dyno run

Then when they can fit me in for a tune see what i can get to, as far as i know iv got all

Mods to push the limits of the turbo.

If this is 220ish itl take me weeks to get used to 250 or 270

The internals will be fine for that. all depends on what rear housing youve got, if its the normal nissan highflow bill does your outta luck for that kind of boost., id suggest going a proper 3076, 20psi will see you too 300. mine makes 270 on 16psi easily enough

.... Thats a bit shit. I figured garret internals ment around the 20psi region

It isn't about what it can 'handle' it is about where it stops making power. You could probably run 28psi no worries, but whether you'd make any more power than 15psi all comes down to what combination of wheels are used.

The internals will be fine for that. all depends on what rear housing youve got, if its the normal nissan highflow bill does your outta luck for that kind of boost., id suggest going a proper 3076, 20psi will see you too 300. mine makes 270 on 16psi easily enough

Hypergear has them making 270kw with the stock rear housing, though they get seriously hot and he smashes 20psi+ through them to do that. Wouldn't be very detonation friendly.

Edited by Rolls

I'd run 16psi through it, maybe a touch more if you need too

I'm doing a safe 20psi with N1's on a 22 yr old bottom end. Replaced the gasket with a cometic mls 1.3mm unit, arp head bolts, smoothed head face etc

20psi is fine. Anything over that u wanna start worrying. I have the smallest turbo kit avail meaning it pumps less air at that PSI than a big one (ie a t51 can produce mammoth power at 7psi but is quite laggy and needs cams)... but psi is a matter for the tune, the gasket, the rings and valve seals. nothin to do with anything else - psi is all relative to the heat and volume of the air going in after all...

Put short I reckon 20 is doable on a stock engine in good nick, provided hes not running anything large (by large i mean anything that a) needs cams changed, b) is a single c) is bigger than a 2860-7 equivalent. Once you go over 350kw you're getting into the danger zone. I'd be happy if I got 300kw but really, the feel and response of the car is more important to me than any digits on a dyno chart

-D

Put short I reckon 20 is doable on a stock engine in good nick, provided hes not running anything large (by large i mean anything that a) needs cams changed, b) is a single c) is bigger than a 2860-7 equivalent. Once you go over 350kw you're getting into the danger zone. I'd be happy if I got 300kw but really, the feel and response of the car is more important to me than any digits on a dyno chart

-D

It isn't the psi that kills motors, hell it is hardly ever even the raw torque that kills them, theres a few blokes running over 400kw on stock engines, it is all down to heat and avoiding detonation, the torque limit for stock pistons is pretty damn high, they will withstand 400kw for quite some time if you keep temps under control and have absolutely zero detonation.

All in the tune imo.

Have the same high-flow 3076 internals from last years SAU dyno-day and pulled 274.7kw on 15psi (smaller rear housing), 220+ this year's SAU dyno-day on stock 7-8psi boost without a decent tune - reason for decrease was engine 're-build' as stock bottom end wasn't happy when past 18psi on a cold-chilly morning and thus replaced with forged internals. Therefore would agree that 16psi is a safe place to start with 'upper' limit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...