Jump to content
SAU Community

R33 Intercooler Kit (CHEAP!)

WLD747
 Share

Recommended Posts

WLD747 Experienced

WLD747

Posted
Posted

Well guys im converting my car to the stock cooler and im gona get rid of my aftermarket intercooler. This is a custom made garret core intercooler and will flow big HP. Its suits GTR or GTST. The piping is for a GTST. It has twin end tanks on turbo side. This comes from the turbo as one pipe and splits into 2. 2'' x 2 in and 3'' out. The whole kit includes piping and clamps and hoses and the cooler. I have found that this cooler still cools perfectly on hot days and flys on cold nights.

Size around 600x300x80 excluding end tanks (APPROX) Perfect for mild upgrades or big hp

Price $1000 or $900 with swap for stock cooler parts;

Will take deposit this weekend and remove the cooler of my car straight away. PM if interested for pickup on saturday or sunday.

Link to comment
https://www.sau.com.au/forums/topic/38061-r33-intercooler-kit-cheap/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • joshuaho96
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By joshuaho96 · Posted

      From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • MBS206
      Nissan Skyline R34(ER34) Front Suspension Noise

      By MBS206 · Posted

      I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Summernats cruiser?
    • MBS206
      NC MX5

      By MBS206 · Posted

      Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...