Jump to content
SAU Community

Recommended Posts

I'm trying to find the main differences between the 92-95 and 96-97 model 180's

I know the later models received an aero kit, different tail lights, and a few interior differences, but what are the main differences engine and drivetrain-wise? Did the 96-97 get the black-top SR20 from the S14's?

Thanks in advance,

prae

edit: also, if the thread is in the wrong area, could mod please move it to the right one :/

I thought so..

a friend's brother is buying a 97 model 180SX with a red top engine, and the dealer's saying thats standard? I thought something was fishy..

I'd try those the NS.com and SWA, but then i'd need to go through the registration and stuff...such CBF :)

Thanks :/

iam from NS.com

The rocker cover is either been painted or the engine has blown and been replaced with an early model SR from the 180sx's and silvia's from Late 91-93. Because from 94 onwards had a black rockers cover. People say there is a small difference between the black and red rocker cover SR's but you cant even tell.

There is no drive train extra's for the Type X, only dif is the bodykit, rear lights and few interior things like seats.

The 96-97 models were fitted with the same engine as the 93-95 180sx's with the black rocker cover and NO VVT.

Yeh i had an 97 model for my first 180 and yes they look the part yes that model has the black top in it and singular rear tail lights and different body kit delux version has sun roof .

im hunting for a set of Version X rear tail lights for my new 180 as i could never get over the style they bring to the car ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...