Jump to content
SAU Community

Mercedes Benz & Nissan

wizlb

By wizlb,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

wizlb Proficient

wizlb

Posted
Posted (edited)

Mercedes Benz has a new business partershipw with Nissan which will allow MB to make engines for the V35 or G35 in the states but with lower HP but MB will add a new turbo....like their AMG models.

Nissan were support to release a new model this pass August in Paris but it was put on hold...

I just like to see what you guys think

B

HERE IS A LINK TO A GOOD READ>>>>>>http://www.roadandtrack.com/future-cars/2013-infiniti-g-coupe

Edited by wizlb
Link to comment
https://www.sau.com.au/forums/topic/381270-mercedes-benz-nissan/
Share on other sites
wizlb Proficient

wizlb

Posted
  • Author
Posted

I want everyone to KNOW...this is happening.....and not something that will happen.

Nissan has a five year plan so remove it G Series of car and in 2011 Nissan was scheduled to show-case the new models in Paris but they were pulled because of this new deal with MB..

The cars will be slower and the more expensive models will have a turbo.....

Google it.....

sonicii Veteran

sonicii

Posted
Posted

^^ I have heard that before too, but I can't really see how it can be true, Nissan stated using the VQ engine back in the mid 1990s, long before there was any collaboration with Renault. and Renault only stated using the VQ in their cars in the mid 2000s, and well after Nissan starting using the VQ35 in their cars.

I think this is just a rumour that Jeremy Clarkson has spread..

wizlb Proficient

wizlb

Posted
  • Author
Posted

This is a signed agreement between Nissan<<<(Renault) and MB which allows them to trade technology.....

This is a real agreement but JC didnt just spread this rumor....its also on G35 Driver forum...........

Just is my two cents

Regarding the Engine: The VQ is clearly a Nissan engine,,,,,,,

^^ I have heard that before too, but I can't really see how it can be true, Nissan stated using the VQ engine back in the mid 1990s, long before there was any collaboration with Renault. and Renault only stated using the VQ in their cars in the mid 2000s, and well after Nissan starting using the VQ35 in their cars.

I think this is just a rumour that Jeremy Clarkson has spread..

mosoto Proficient

mosoto

Posted
Posted

^^ I have heard that before too, but I can't really see how it can be true, Nissan stated using the VQ engine back in the mid 1990s, long before there was any collaboration with Renault. and Renault only stated using the VQ in their cars in the mid 2000s, and well after Nissan starting using the VQ35 in their cars.

I think this is just a rumour that Jeremy Clarkson has spread..

Next time you change the door lock see what is written on the body of the actuator, it aint Nissan :). There are a number of parts on the car that are not Nissan, why not the motor as well?

sonicii Veteran

sonicii

Posted
Posted

?? I don't really see the relavence? The 350Z/350GT motor 'could' have been built by anyone, but the fact Nissan and only Nissan were using the VQ long before their connection with Renault, and Renault only started using the VQ in the last 5 years or so, suggests the chances that Renault built/designed it, are fairly slim.

mosoto Proficient

mosoto

Posted
Posted (edited)

The VQ35DE made it's debut in 2001 in the Nissan pathfinder at the same time as the Renault Vel Satis. There is no record (other than one persons post on another forum) that the VQ35DE engine was used any earlier than 2001.

http://en.wikipedia....issan_VQ_engine

Given this platform made it's appearance after the 1999 aliance of the trwo companies one could plainly argue the VQ is not wholly Nissan. The same can also be said for the chassis. The Nissan FM platform of the V35 & 350z has been argued as designed by the French, again this platorm came about after the alliance of Nissan & Renault. Personally I don't really care who designed it if I enjoy driving it.

Edited by mosoto
wizlb Proficient

wizlb

Posted
  • Author
Posted (edited)

The first VQ was a VQ20DE builded by Nissan in 1994

http://en.wikipedia.org/wiki/Nissan_VQ_engine

after you review the info you will find the earlier engines were the frame-work for the VQ35DE and so on.....

But my question is this????????????????

Do you think MB will reduce the HP and put a small turbo in to produce something like 280HP or do you think MB will add more HP

...DO you think MB will be increase or decrease the future HP...of the VQ engines???

Edited by wizlb
mosoto Proficient

mosoto

Posted
Posted

The first VQ was a VQ20DE builded by Nissan in 1994

http://en.wikipedia....issan_VQ_engine

after you review the info you will find the earlier engines were the frame-work for the VQ35DE and so on.....

But my question is this????????????????

Yes that particular VQ motor may have come out in 1994 BUT it was not a VQ35DE. You are comparing apples to oranges.

The VQ35DE came out in 2001 and no earlier. Just because they're VQ motors does not make them similar in any way other than the 6 pots.

And I don't forsee 6pot motors getting higher in capacity. More likely 4 pot turbos or big litre 4's, economy will be a design factor no doubt

zebra Grand Master

zebra

Posted
Posted

Yes that particular VQ motor may have come out in 1994 BUT it was not a VQ35DE. You are comparing apples to oranges.

The VQ35DE came out in 2001 and no earlier. Just because they're VQ motors does not make them similar in any way other than the 6 pots.

And I don't forsee 6pot motors getting higher in capacity. More likely 4 pot turbos or big litre 4's, economy will be a design factor no doubt

LOLWHUT.

Just about every part is interchangeable

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
×
×
  • Create New...