R33 Auto Cluster Into Manual

[black25t]

ok, so i know this has prob been covered before, so please forgive! but i just put an auto cluster into my manual r33 and the speedo is only reading half of what it should be (30kmh when doing 60). the reason i replaced it was because my old one was doing the usual speedo / tacho thing that 33's do, jumping all over the gauge. Reading through the forums, i have taken it that putting in the auto cluster shouldnt be a problem, so can anyone tell me how to fix this or post a link up to somewhere that can tell me how or what the problem is and how to fix? or could it be just the usual dry solder issue or something simple like that? any help would be greatly appreciated.

cheers

[DVS JEZ]

Honestly u need to find a manual cluster. I did a manual conversion on a 33 and had the same issue of half speed. Only way that worked was to get a manual cluster. When i was researching i found a thread in the uk about soldering and unsoldering the calibration pins on the back of the cluster.

I suppose u should be able to copy the pins from the manual to the auto.