Jump to content
SAU Community

R33 No Start, Alternator?

insert

By insert,
in General Maintenance

 Share

Recommended Posts

insert Contributor

insert

Posted
  • Author
Posted

Testing with a 5W bulb in a test light won't tell you what's happening when you're trying to ram several hundred amps of cranking current through the starting curcuit. You need to unbolt the terminals of the earth lead and physically check / clean them. I've seen this problem before with poor earths. They run low current fine, but increase the current and they play up. The fact that it starts properly when you're using a different earth (and possibly positive terminal) hints that your problem lies with poor contact.

this is where i am leaning. i've been hooking the spare battery up under the bonnet. i'll try hooking it directly to the battery in the boot. when i have the key in and turned to on position everything works in the car except for windows. so maybe youre right, it will draw small amounts of power but not enough for everything. but once i turn the car on with spare battery, and unhook the spare battery (from under bonnet) the windows work fine. i dunno, doesnt really make sense to me. we'll see.

Perform all the tests i said. checking just the battery voltage will tell you next to nothing apart from if the battery has dropped a cell or more

Crank and check voltage (get another person to check it) and tell us what you get

A stuffed alternater will not stop the car from starting on a fresh battery

Has your stater been out recently?

i have no idea as to car history. bought it 7 days ago... ran fine for a week no issues whatsoever. there is a lot of aftermarket wiring running around this demon. with alarm, turbo timer, sound system... gauges... and a few other little bits, there is a lot of wires and fuses thrown in everywhere, i am not too sure where what goes to.

as for checking cranking voltage i would have, but there was nobody around to check for me this morning.

Check connections on starter mate ....

a starter problem just doesnt make sense though. the starter starts the car just fine when i have jumper cables hooked up to the positive post under the bonnet. i doubt its a starter issue. car starts fine when its getting power. if there were starter connection issues, then it shouldnt start regardless of whether i hook power up under bonnet or boot.

thanks for all the replies guys. i'll keep you informed on what i find when i get home this evening. if nothing, then its off to the shop tomorrow morning. between school and work, i dont have much spare time to muck around, as much as i'd like to.

89CAL Grand Master

89CAL

Posted
Posted

I would check some voltages at both the battery terminals and the terminals in the engine bay,you may have a problem with the alternate charge getting to your battery and your battery voltage getting to the front of the car

insert Contributor

insert

Posted
  • Author
Posted

unfortunately i didnt have a second hand to help out with cranking the car while i check battery volts.

however, i did hook up the spare battery to the battery in the boot and try to jump that way. got nothing. but when i hook up to posts under the bonnet she fires up.

so i am betting on some kind of electrical short/problem between battery and alternator somewhere, and this problem is also affecting the ignition circuit.

i checked, tightened and cleaned my earth connections in the rear, as well as the ones under the bonnet (brushed them up with a wire brush, and reattached them) but everything seemed good to begin with. so the problem is electrical. i just have no idea where it might be.

89CAL Grand Master

89CAL

Posted
Posted

Yeah i was leaning towards that. Best bet is to follow the cables (not sure if they run underneath the car or in the car) and check for shorts or breaks

Not real helpful but seems like your on the right track

insert Contributor

insert

Posted
  • Author
Posted

i'm still looking to find the bad connection. but i also decided to check alternator on the posts under the bonnet, before i only checked it on the battery in the boot.

it seems that under the bonnet my alternator is charging 15.2 volts... overcharging... but none of that is going back to battery, and nothing from the battery is getting to the front... so i continue to look for my short... but at least i dont necessarily need a new alternator. we'll see if its still overcharging once everything is fixed.

insert Contributor

insert

Posted
  • Author
Posted

SOLVED!!!!!!!!!!!!!!!!!!!!!

thanks for all the input and ideas from everyone.

ended up finding a bad connection under the bonnet. i didn't trace it all the way around to see where it went. just went as far as i had to. as this car has a lot of aftermarket wiring floating around, and i didnt want to bother trying to decipher it all, i'll do that in the future if i have to.

everything seems to be good. she fired right up when i repaired the earth wire, the earth itself was corroded, and the wire was rubbed through in one place. but that's what you find in a 17 year old car.

checked the charge at the battery in the boot, she is charging 14.1 volts... slightly less than my desired 14.2-4, but what're you going to do. i'll just write it off as a slight inaccuracy in my voltmeter.

cheers all

89CAL Grand Master

89CAL

Posted
Posted

As long as its around 14V its fine. Mine charges at 14.0V sometimes and 14.5V at other times (Have the voltage displayed on my turbo timer)

Should be all good, glad to see you solved it. Thought it might be something simple like that after you said it worked fine when powered from the front. Amazing how something so small can have such a large effect :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • GTSBoy
      Help! Leak coming under transmission

      By GTSBoy · Posted

      So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • PranK
      My new to me M35 Stagea wagon

      By PranK · Posted

      Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...