Jump to content
SAU Community

Recommended Posts

hey all, just wanted to ask any guys with 31's whats involved with putting a 20 or 25 into a 31? looking at a cheap 2l pintara wagon and rough cost for putting in a 20 or 25 with auto box.

rather put in this section for a quick reply. wondering if it could be done for around the 4K mark not including the car.

cheers

matt

Link to comment
https://www.sau.com.au/forums/topic/381998-pick-peoples-brain/
Share on other sites

hey all, just wanted to ask any guys with 31's whats involved with putting a 20 or 25 into a 31? looking at a cheap 2l pintara wagon and rough cost for putting in a 20 or 25 with auto box.

rather put in this section for a quick reply. wondering if it could be done for around the 4K mark not including the car.

cheers

matt

While I never swapped an engine in my old r31, I did have the misfortune to have the torque converter die... was cheaper to get it converted to manual, so naturally I did that. I think the parts were around $650 which came with the pedals and xfercase and clutch, and around $650 labor to fit.. this was back in 2003 so I don't know if the parts/labor would be cheaper/more expensive but I'm guessing if you got the engine + box you'd save a bit. That said the sr20 is probably cheaper and lighter and they give a decent amount of power and are pretty darn strong... also you'd have to factor in getting bigger brakes and getting it engineered. Dark.Sky put a rb25det into his 32 which originally had the rb20det and he had to do the above so you can guess that there is probably a little bit more involved for you...

-D

gonna struggle doin that on a pintara matt

even tho the r31 platform is different, the trans tunnel on the manual is narrower

*edit* - read that you're goin to do it with an auto, thats not so bad

if its pintara, you'll just need skyline crossmember and some RB30 engine mounts (as the RB20 / RB25 ones push it too far forward and fan chews out the back of the radiator)

if you can find a skyline to put it into, piece of cake. swap RB30 engine mounts off and onto the new motor, run loom, think theres like 5 wires to get it to basically power up (theres a wiki section on R31SC with this info from memory). If you score an S3, the auto is the same as 20DET and 25DET auto boxes (4sp electronic auto)

haha thats what i was thinking matt. found a one owner pintara with only 120000 ks on it. its got the 2l auto and only wants $1200 for it.

yeah adam something to put the dogs in the back. dont think i could handle the stock 2L though

tonnes of gxe , silo, and TI s3 r31 for 500-1000 bucks in vic country area. in good nick too just out of rego- RWC

ebay is full of them

rb20det one too but he wants a bit much for it

I tried to buy a nice one in dinga the other day but someone was test driving it while the guy was on the phone to me, kid bought it. grrrrrrrrrr

yeah more than i have to spend though:( only have a budget of 5K at this stage

If 5k total is your budget, I'd definately follow the above advice and just buy a 31 with all the bits and pieces (one with an rb30 will do) - Can probably get a Silhouette for that money in decent nick - good cars

-D

If 5k total is your budget, I'd definately follow the above advice and just buy a 31 with all the bits and pieces (one with an rb30 will do) - Can probably get a Silhouette for that money in decent nick - good cars

-D

nah has to be a wagon so silo is out. thinking maybe a patrol with the rb30 in and doing some mods on one of them

nah has to be a wagon so silo is out. thinking maybe a patrol with the rb30 in and doing some mods on one of them

... or just get an R31 Wagon... the GXE's are pretty darn good as a platform to start with... I don't argue with your choice but the r31 platform is robust and is good for many applications - just need to be patient and get the right one

Good luck! I reckon for $5k you'll get an excellent skyline

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As I wait for parts to be delivered, I have managed to procure via a contact a R32 Nistune ECU......for now I just want to monitor what the car is doing but eventually.......who knows where we go 😂
    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
×
×
  • Create New...