Jump to content
SAU Community

Recommended Posts

Hey guy just have a quick question and need some help cause dont no wats wrong.

i purchased a hypergear PU turbo and installed all perfect no problems.

the problem im having is when i hit boost it just doesnt make any suction or turbo sound and if it does its really low and flutter or even my bov thats plumed back doest have the release sound and im hitting like 4 psi.

With my stock turbo i had before installed which is a S1 turbo it had suction turbo sound and flutter and release pressure of my bov and it was plumped.

i thought it might be the lag abit on it thats why it needs to hit more RPM but still nothing just a faint lil sound but my stock turbo sounded crazy :).

ive got alloy intake pipe not the stock rubber one.

Any help would be great cause cant take it to hypergear a lil to far at the moment to get there so just thought id ask here if anyone had come across anything similar.

Edited by RamR33
Link to comment
https://www.sau.com.au/forums/topic/382026-turbo-sound-different-to-stock/
Share on other sites

Just getting checked now on dyno,was thinking big boost leak aswell.....had tryed the preload 2/3mm but still nothing last night still hit boost like 4 psi but not thrashing and that normal..,i checked everything in oil feed line which oil was coming out as ussually turbo spins freely and great and minimal shaftplay...has to be big boost leak for sure cant think of anything else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...