Jump to content
SAU Community

Recommended Posts

THE LAST DECA OF 2011

Sat 19 November

And once again we ask for your assistance

For this event to SMOOTH on TIME and SAFELY we need a small group of volunteers (OFFICIALS) to help

out in 3 sections in the morning and 1 in the afternoon.

All Officials on the day will be supplied lunch and drinks and go into the draw to win 1 of 2 BP fuel cards..

An Officials breifing will be held before the drivers breifing. So all Officials will need to be at

the Shepparton DECA complex before 8am on Saturday.

Be aware NO DRIVERS BREIFING OR COMPERTITION will take place until all Officials positions have beed filled.

So if this sounds like you or 1 or more of your friends or family post up in here and i add you to my list.

Cheers WayneO.

MORNING

SKIPPAN

Starter.. Wayne

Finisher..John

Spotter.. Timmy

Spotter.. Bobby

MINI WANG

Starter..

Finisher..

Spotter..

Spotter..

Spotter..

LONG WANG

Starter..

Finisher..

Spotter..

Spotter..

Spotter..

AFTERNOON

SKIDPAN

Starter.. Wayne

Finisher..John

Finisher.. Tim

Spotter..

Spotter..

Link to comment
https://www.sau.com.au/forums/topic/382413-deca-officials/
Share on other sites

First DECA in 2 or 3 years I will be out of town otherwise you know I'd be there volunteering... :(

I echo what Jules said - best vantage point as a volunteer, AND you get free lunch - plus this month go into the draw for a $50 fuel voucher.... awesome!!

Since Bec is racing I'll take her spot as the long wang starter!

Long Wang starter is my spot :P (but I wont be there this month so you can do it ;) )

Link to comment
https://www.sau.com.au/forums/topic/382413-deca-officials/#findComment-6101787
Share on other sites

me and 4-5 others are 100% dowm for spidpan fun. no volunteering though lol

volunteering dosent mean your stuck doing something all day, you can still go out in cars and that

you and the 4-5 others would be much appreciated for the help.

even do the wangs in the morning which means your free in the arvo to go on the skidpan

just a thought anyways :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/382413-deca-officials/#findComment-6106859
Share on other sites

That's a shithouse attitude. DECA isn't run for the spectators, get your mates to volunteer.

we could make it a NON SPECTATOR event, so the only way people could get in is if they are driving or volunteering :whistling:

Link to comment
https://www.sau.com.au/forums/topic/382413-deca-officials/#findComment-6107888
Share on other sites

That idea has been floated before. I don't necessarily think it's the best idea but the day is always short on volunteers as people come up to watch the spectacle (for free) and have no intent on ever helping. Maybe charging for spectator entry would be a good idea.

Link to comment
https://www.sau.com.au/forums/topic/382413-deca-officials/#findComment-6107902
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...