Jump to content
SAU Community

Recommended Posts

Its really my fault, I never submitted the leave request. I thought I did, I submitted like five all at once for exams and a wedding, but apparently not for DECA. Even though I had spoken to my manager several times about having this weekend off, but when I actually saw my hours it was too late to change/replace them. No one wants to work a Saturday.

On the plus side I always spend a stupid amount of money at DECA which can now be put towards the 180 fund.

We are a bit late on this but Kat and I will be there.

Kats turn to drive something and I will volunteer so put me wherever - I will need some guidance on what I need to do though as never done one of these.

Am I able to reg as a driver as well and have one or two blasts here or there? No crashes I promise :P

We are a bit late on this but Kat and I will be there.

Kats turn to drive something and I will volunteer so put me wherever - I will need some guidance on what I need to do though as never done one of these.

Am I able to reg as a driver as well and have one or two blasts here or there? No crashes I promise :P

Cheers.

I will find you a spot. its not brain surgery so you will be fine. Be there for the breifing and we will word you up.

As for having a blast here and there that would be a no.

Unless you enter and have your CAMS or AASA licence have your car ready and pay all fees.

See you guys up there

Cheers.

I will find you a spot. its not brain surgery so you will be fine. Be there for the breifing and we will word you up.

As for having a blast here and there that would be a no.

Unless you enter and have your CAMS or AASA licence have your car ready and pay all fees.

Awesome!

Yep sorry I meant if we are both entered as drivers, but we only have the one car. We have our CAMS licences etc and doing the forms / payment now.

Yes Paul you can both enter and drive the car. The team will space your numbers so once the first driver has their turn you should be at the start of the pack again for the second driver.

The days are pretty cruisey so you wont have any issues.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Was that with the cas upside or correct way up?
    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
×
×
  • Create New...