Jump to content
SAU Community

Recommended Posts

Guest dmallison

--------------------------------------------------------------------------------

anyone interested in buying a Gtech, dont get ripped off and pay $399

can supply brand new in box including freight Australia wide for $160.

Call Darren on 0417898512 [email protected]

Well Ben - you can add my very ordinary effort of tonight.

R/T = .479

60' = 2.528

330' = 6.113

660' = 8.872

mph = 91.66

1000' = 11.178

ET = 13.118

MPH = 116.89

Km/h = 188.12

Must be able to do better then that - me thinks the driver needs more practice. :(

I'll scan the timeslip later - but you saw it.

hey b-man you wanna run :(

still at least your trying and the mph is good ;)

practice practice and practice

it would almost pay you to bring your car down to calder for a friday night you could get around 10-15 runs @ least if you try hard enough and the car can hack it now thats what I call practice

meggala

I know exactly how you feel Brendan ;) It's all part of the learning experience mate. I've had a drag meet where I started out with a 13.943 @ 117.35mph. In a way it actually makes you feel even better when you do finally nail a good one.

Gotta say though mate, you really suck at getting off the line :(

91.66mph at the 1/8th is very promising though. To give you an idea I had the following numbers on a 91.91mph at the 1/8th:

60' - 2.090

330' - 5.651

660' - 8.377

MPH - 91.91

1000' - 10.739

ET - 12.690

MPH - 119.12

My best numbers are:

60' - 2.143

330' - 5.492

660' - 8.188

MPH - 90.48

1000' - 10.531

ET - 12.473

MPH - 118.34

As you can see from my numbers above, it's a fine line between wheel spin and bogging it down. In the top run I had a good 60' (2.090) but then it light the rears up at about 70-80' and I lost out on ET. In the bottom one I came off the line slower and got better grip and therefore a quicker ET but lost out on top end MPH.

Yeah - I SUCK at getting off the line - It's much harder that you think hey.

If I give it too much, I seem to either wheelspin, back off and bog down - or the clutch slips (yeah still slipping on high boost)

That run was on low boost - high boost is slower (13.6) MPH is 117 -

I'm sure it is all driver related though.....

I was a bit disapointed to be honest - but hey practice make perfect :(

Hahaha... how hard can it be to go dead straight (well most of the time) for 400m? It's easy! Not when you've got a turbocharged engine that comes on boost like a mofo!

Keep at it mate. In another meet or two you'll have knocked 0.5sec off at the very least. You'll probably go mid/low 12's @ 120mph within the next two meets. And then when Brett gives you a shot on the Nittos you be into the 11's @ mid 120's. :(

He he - yeah me too - I had chronic axle tramp when trying to do a burnout - I think good suspension would help with the launches and traction -

But hey - it's easy to blame the car when most likely is the driver in my case :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...