Jump to content
SAU Community

Recommended Posts

Hey,

I've recently got a R33 GTST and just wondering what sort of KM people get to a full tank? I've got 400km at the moment with roughly 1/8tank left (BP ultimate). The car is 100% stock. Is this normal?

The car is only a daily so i'm looking to get the best milage possible. Should I start looking at the O2 sensor? Is it worth getting something like a NISTUNE to trim some of the fuel? Suggestions would be greatly appreciated!

I wouldve thought about 500km/tank would be about right? Am I being too optimistic?

Cheers :)

Link to comment
https://www.sau.com.au/forums/topic/382831-r33-gtst-fuel-consumption/
Share on other sites

400 of city driving sounds pretty fair. You could expect to get more on the highway.

City driving will have very little time to utilise the O2 sensor, since the ECU only reads the sensor at constant throttle (cruise), and there's not a lot of constant throttle in stop-start city driving.

I'd say that 60-70% driving is on the freeway, sorry I shouldve mentioned that. Idling and low revs the O2 sensor runs a closed loop so basically isn't in effect yeah? I wouldve thought that it wouldve got 450-500km pretty comfortably to be honest. Would getting it retuned with a remap gain me much better gains in economy for it to be feasible?

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...