Jump to content
SAU Community

Recommended Posts

Hey Stagea owners,

Doing a bit of birthday and christmas shopping for myself and interested in purchasing a short shifter, I'm aware of the damage they may cause to syncro's due to the fast shift rate.

Currently looking at Nismo's selection of short shifters in the following link http://www.nengun.com/nismo/short-shift wondering as to which short shifter i should be using for my Rsfour S. Have been doing quite a bit of reading and confused as to whether or not my car uses the 34gt-t transmission with the neo motor, or the 33gt-r transmission with the neo motor.

Much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/383049-nismo-short-shifter-question/
Share on other sites

My Stag has a short shifter.

The only thing I have to compare it to is my R33. I'd prefer a box without it. It's incredibly notchy and if you aren't perfect it shifts like a bastard.

To be honest, assuming the shift would be the same as my 33, I'd prefer it without a short shifter. But I'm not sure it's apples and apples due to what I assume is a hardier box in the Stags to cope with AWD.

Yeah i can understand what your saying, I would have thought the Stagea would have been a better base for a short shifter due to the heavy duty components as opposed to the R33 gtst transmission.

Do you know what transmission the RSfour S uses? gt-r or gt-t...

^^^as above - none of the shifters in the Nengun ad will fit - you need an awd one 32339 - RN595

The Stagea box is the same as GTR which is the same as GTT only plus a transfer case so I guess it will be the same to drive (i.e. incredibly notchy etc).

See the nismo website:

http://www.nismo.co....df/clutch14.pdf

  • 2 weeks later...

i have no issues daily driving with mine

i don't use it to change gears faster, if anything it makes it harder to shift fast because you have less leverage to push against the syncros with

i put a stock shifter in and it was a longer throw than my r31 and felt like a truck! so i went back to the short shifter

it just makes the gearbox feel nice and tight and means you can change gears with a flick of your wrist

Just love the solid feel it gives you when shifting and the shorter throw distance, it makes shifting so much more easier with a nismo equipped short shofter

I assume, based on this thread, you've never driven a Stag with a solid shifter.

Not all cars are the same. Save your cash. By all mean shorten the shift, but don't go for a solid.

And shorter and solid actually making shifting harder as you need to push the level harder due to less leverage and also have to be much more precise due to the solid.

I'm loathe to say they are shit, but it's not far from the truth.

  • 2 weeks later...

^^wtf? solid shifter makes it harder to shift??? pfft. the nismo solid shifter is 7.5mm shorter than standard (faark all) and the solid part is refering to NOT being a 2 piece shaft with a rubber dampener in the guts of it. aka one piece of SOLID metal shifter

the short/quick shifter changes the pivot point so you have LESS leverage and LESS distance for the shifter to travel, hence more force needed to make it shift.

its all about user preference really, some of us dont like burying our hand in the back seat changing into 2nd.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...