Jump to content
SAU Community

Recommended Posts

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Oil has had Engine flush through it. Dropped the oil and put Diesel grade oil through for a different type of clean (Basically 15w40 oil with Detergents in it). If this comes out good then the next oil will be Royal Purple.

:)

20111120211423900x12001321979560.png

20111120211311900x12001321979559.png

If Anyone wondered how much longer the ass is in a 4 door then this will give you an idea with the Exhausts swapped.

201111231538531200x9001322178450.png

201111231539081200x9001322178450.png

201111231539251200x9001322178450.png

Put on my Wedsport RS-5 Super Streets :)

F:17x8 235

R:17x9 255

They need a Serious Polish! Its been a while...

201111250641481200x9001322177711.png

20111125064303676761200x9001322179126.png

201111250641271200x9001322177560.png

201111250622041200x9001322177560.png

Buying some Iridium plugs today. Next plans will hopefully be some new bushes,new air filter and maybe a brand new Bosch Z32 AFM because im sick of 17 yr old AFMs acting like 17 YR old AFMs.

I'm mirin, I'll have a look for the issue of HPI and let ya know what number R33-R it was.

Maybe this is the one you are thinking of? http://www.skylinesaustralia.com/forums/topic/229099-1993-r33r-impul-sedan/

Nope, was definitely gunmetal. I've had a look but can't find the issue :/

  • 3 weeks later...

Slowly getting there. Have Decided (mostly) that i will be putting the Impul rims back on and striving towards restoring this car to its Original Visual Quality

As ive decided this just isn't a car that should be tampered with too much, seeing as its somewhat rare and has its own style from factory.

201111261712551200x9001323882562.png

Didn't end up getting Iridiums(Thought that was what we were getting but mate picked these up).

201111261717111200x9001323882562.png

Up on ramps ready to Take gearbox out for new clutch installation.

During which i found out that the car also has Impul Swaybars :)

201111302005111200x9001323882562.png

201111302218301200x9001323882562.png

Short-Shifter(Uknown brand) works a treat. :)

201111302221391200x9001323882931.png

201112052239021200x9001323882931.png

Clutch,Flywheel and throwout bearing had certainly seen better days.

201112052238401200x9001323882931.png

201112082008331200x9001323883025.png

New clutch to go in :)

201112052239191200x9001323882931.png

Pulled out Injectors. Bit of gunk here and there.

201112111333541200x9001323883025.png

201112111334341200x9001323883025.png

Had spare injectors from my previous RB25DET (f**ked Piston 6) in my previous Blue Skyline.

so sent them in for Reconditioning and Flow test(2 were a bit low initially but all tip top now :) ).

So just had to swap injectors there and then. Too easy :)

201112111402511200x9001323883025.png

201112111406571200x9001323884203.png

All done.

201112111436151200x9001323884203.png

Machined Flywheel.

201112141800181200x9001323884203.png

How ya gettin onnnn Throwout bearing?

201112141800291200x9001323884203.png

201112141809311200x9001323884245.png

Clutch in.

201112141937261200x9001323884245.png

Scraped out the remaining clutch from the Bellhousing.

201112142159371200x9001323884245.png

201112142200131200x9001323884245.png

Gearbox oil was low but still decent oil. has a cocktail of whatever it had,Some Penrite 75 and a fair bit of DX3.

Falls under the category of "Thats what it gets" for now. Plan to buy some Smurfs Blood soon.

Havent started car yet as we finished after midnight but will see how it goes soon.

Next up is New 255s for the Impul Rears and Possibly some Diff oil.

  • 3 weeks later...

Slowly getting there. Have Decided (mostly) that i will be putting the Impul rims back on and striving towards restoring this car to its Original Visual Quality

As ive decided this just isn't a car that should be tampered with too much, seeing as its somewhat rare and has its own style from factory.

Next up is New 255s for the Impul Rears and Possibly some Diff oil.

the impul rims are so much better what are you doing man?? wicked car bro looks unreal just put those rims back on.

Done Deal.

201201031455541200x9001325773318.png

So yeah car was having dramas with hitting boost. Changed all 3 ECU/Fuel pump Relays and that fixed it a lot. Now it just needs a proper tune.

Tune is Scheduled for Saturday 14th and i cant wait!

201201041534491200x9001325773060.png

201201041518184545454541200x9001325773060.png

lol@NissanFAST aha

201201041308061200x9001325773059.png

Gettin sniffed.

201201042316571200x9001325773060.png

This will be installed in the coming days. Did someone say Induction noise? :P LOL

inb4anynexentyreorhkspodhate. :closedeyes:

201201041739161200x9001325773318.png

First Registered Voyage :P

201201051659221200x9001325773318.png

First Port of Call :D

Have been inspired to possibly try and source a roof spoiler further down the track.

I also legally get to drive around with one number plate on the rear for at least 2 weeks as i put in an order for my plates to be reprinted. :D

Happy New Year,Peace.

Installed New HKS pod filter using a metal adapter bought from Autobarn specifically labelled to be for R33 2.5L.

But no, Didnt fit as planned lol. Got it on on an angle with only 2 bolts then used some washers with the other bolts to hold the other 2 sides down.

201201071402491200x9001325950577.png

201201071630221200x9001325950577.png

201201071709331200x9001325950577.png

Pretty sure a headlight restoration is on the cards hopefully very soon :)

Did a bit of a height check. Not very happy as previously stated with my ride height for legal purposes but oh well for now i guess.

201201071711521200x9001325950577.png

201201071712531200x9001325950890.png

So yeah some Fuel pump issues arose where fuel would just cut out at random moments a few times each trip

and there was also a problem where the revs would drop below now idle level,recover and then stall..

Installed my spare fuel pump from my first 4 door today which seems to have fixed the intermittent fuel problem but the stalling has happened once or twice on a trip but definitely running better and sounding better :)

Tune is prospected for next Saturday and i cant wait as im driving around on no boost :(

1 positive is that i can do much lower speeds in higher gears than in my previous stock skylines so its not so bad just cruisin around off boost. 30 in second at 2100rpm sounds beautiful :P

201201072358411200x9001325950707.png

looking good buddy. i know a guy putting a 26/30 into a R32 r Impul four door any chance you going 25/30?

Cheers mate :D

Theres a chance in the far distant future but it wont have a 25 head ;)

hey mate, just wondering about the forward facing planum, did it come with it or did you get that after?

Came with the car when i bought it. Not an impul Item but. Just a Greddy Copy.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...