Jump to content
SAU Community

Recommended Posts

Hey Guys biggrin.gif

Names Yohann, only 16, I've grown up with cars love them, love Gran Turismo and I can't wait until I get my P's.

I'm just wondering what I need to cover if I were to make a drift car? I really want to take drifting up

I heard it's expensive maintaining the car? Would buying a second hand car be cheaper or just getting the shell and then doing a engine swap?

How does the insurance work with a drifting car, it's not road legal is it?

Would it be difficult doing so since I'll be on my P's? because I aim to get this done from 18+

And of course I'll be taking lessons before I get the car!

Thanks for your help in advance,

Yohann

Edited by effortz
Link to comment
https://www.sau.com.au/forums/topic/383404-how-to-start-drifitng/
Share on other sites

Until you get a feel for a car you will have no hope. i could say handbrake to get the car sliding and then use the throttle to control angle etc but that wouldnt really mean much. I learnt how to drive in the pine forest. I wouldnt call myself a dr1fter as all the cool cats call it. I just like to get the car sideways on the abandoned air strips and fish tail up there. something like that is a good start, somewhere you cant kill others, or get nagged my an angry mob as it is very frowned upon :(. and on the money side of it... unless you are making +700 a week in my opinion you wont be able to "maintain" your drift car as they arent a very practical daily (constantly clearing defects). the chepest way would be getting a shell obviously. If you are serious save some coin, if you can use a spanner get a shell if not buy complete car. Good luck. If you are for real its an expensive path...

Oh and another piece of advice no matter how realistic your forza 4 or GT5 is. IT IS NOTHING. I repeat NOTHING like the games. You crash and that how you learn. there is no rewind button.

Forza 4 and GT5 arent, get a logitech G25-G27 and play Live for speed www.lfs.net, its how i learned to drift and how i practice, steering techniques are the same and can be carried over from the game to real life and its good for learning lines and how to follow someone

buy a NA S13 (p plater legal), lock the diff, get a decent seat and go drifting

only spend money on fixing it, entry fee's and tyre's and it will cost shit all as long as you don't buy a bomb and do all the work yourself

At least your asking the right questions.

As stated above it's best to have a 2nd car as a drift car incase somthing happens (i've come close to the wall).

If you deside to use your daily as a minum do the following.

2nd hand coilovers, somthing with seperate hight and spring rate adj like cusco zero 2R. BC's are good bang for buck if you wona go new.

Front and rear struts bracs and front and rear sway bars.

A front mouht intercooler (return flow is best for road legal) 3" dump pipe and exhaust. stock airbox with K&N panel filter and a tune (nistune ecu is a good bang for buck ecu)

You will need a helemt and i highly recermend a harnes. I used stock mounting points (removed rear seat) and drilled a hole in the transmition tunnel, keep the stock seat belt for road use and use the harnes for tack. This wont be illegal.

Oh and one other thing a set of 17x8 or 17x9 are good as you can run a 235/45/17 which are generly the cheepest to get.

Here's my take on advise for a first time drifter (disclaimer : this is my opinion from my own experiences , take it how you want)

To start drifting you're going to need a car , remember your learning , it's going to get trashed . forget being fully hectic and jdm , your car doesn't have to come from japan to drift , there are plenty of local rwd cars to pick through (i'm actually building a 'missile' atm out of a el falcon , best bang for buck i could find on the market , a good sift through classifieds can find you one well under 1k and manual conversions if needed are easy to find for cheap and parts are still plentiful) , get onto bond roll cages and buy a bolt in roll cage (if you crash bad enough to not be able to put it in another car , it was money well spent) , get yourself a decent lsd or even a weldy , a nice comfy seat that holds you in place and make sure your h/brake works , search for some decent s/h springs/shocks add the obvious like tyres etc and get out there and give it a go :)

Yep, I agree with toffy.

Step 1, buy a manual RWD car with LSD or weldy for less than $1500

Step 2, get some tyres

Step 3, go to a drift practice day.

Step 4, rip some skids.

Step 5, repeat step 4 until you run out of something (tyres, fuel or talent)

Keep drifting that snotter for at least 1 season. Maybe give it some love, see how you feel.

Once you've mastered that and can rip a pretty good skid, save up and buy a 2nd hand car that's already proven, you see lots of drift cars for sale for less than $15k that are pretty epic. And I can guarentee you'll get more bang for buck getting a $10-15k drift car than spending $15k on your snotter. Plus you can then lend your snotter to a mate and share the drifting love :)

If I had to do it again that's what I'd do. I spent too much dosh on my car straight up, now I'm to chicken to point it at the wall or do massive entrys.

  • 1 month later...

I'm not sure how common this is, but it was the problem with me and a few others I know. What I started drifting I often used the throttle too much, I tried to use the throttle to control how far the back of the car came out, this isn't the best technique I found. It is better to treat the throttle as a tool to keep the rear end slippery, only use enough throttle as you need to keep broken traction in the rear. Use your steering wheel to control the slide, this is a much better way to learn and will set you up well for later on when you start doing 120km/h+ corners in the dry. Much better to control the slide.

Also, a good seat makes a huge difference, same with steering wheel.

I'm not sure how common this is, but it was the problem with me and a few others I know. What I started drifting I often used the throttle too much, I tried to use the throttle to control how far the back of the car came out, this isn't the best technique I found. It is better to treat the throttle as a tool to keep the rear end slippery, only use enough throttle as you need to keep broken traction in the rear. Use your steering wheel to control the slide, this is a much better way to learn and will set you up well for later on when you start doing 120km/h+ corners in the dry. Much better to control the slide.

Also, a good seat makes a huge difference, same with steering wheel.

This man speaks the truth thumbsup.gif

I started off with 300rwkw, this is not help at all. pirate.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...