Jump to content
SAU Community

Recommended Posts

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

sad.gif hmmm thats not cool. the plan for the moment is to keep it as simple as possible and then as funds permit, slowly rebuild the dead engine we pull out ready for the day when the engine we put in dies lol

current engine has a REALLY bad knock. had ESP have a look at it and they said definitely a rebuild and to budget for between 12-15k. current engine was rebuilt about 25000k ago in melbourne, so forged internals, r33 crank, n1 oil and water pumps, and also n1 block, reconditioned head. unfortunately not being incredibly mechanically minded, at least when it comes to the internals of an engine, i'm relying on what places like ESP are telling me

Hey! Just noticed you're in Banks....mighty close to me....in fact if I listen carefully I may be able to hear you typing.

Depending on what went wrong with your current engine, if may be better to rebuild it (a basic one)

Forged Pistons and rings - ~$1000

standard rods are fine for 400rwks

New bearings ~$300

Machining/assembly - ~$1000 maybe a bit more

New Nissan head Gasket - ~$60

and Oil Pump - $500-1300 depending on what you want

and should be good to go using the old intake/exhaust gaskets

Edit - just read your last post...if that is all done already definitely rebuild it.

may only need new bearings and give the crank a quick machine, or buy a 2nd hand crank

if yours is the black on black soarer then I've spotted you a couple of times in the last 10 months since i moved down this end of town.

current engine lost oil pressure very suddenly cruising at about 150km/h and instantly developed a nice clunk.

i would be more than happy to get this engine rebuilt if it was going to work out to be about the same price as the swap we're thinking of doing.

our budget for the swap is $7000. so thats $2500 that ESP quoted us to do the swap and then about $4500 to purchase an engine.

the things I'm most worried about are we don't know how bad a shape the current engine is in until its opened up and who do we get to do the work seeing as i can't do it myself

Ye that would be me in teh Soarer :)

If you can pull the motor out yourself with the help of a few mates you will save yourself a metric butt load of money.

You have a fair budget for it, so providing you can get the motor out you will get a reasonable RB26 for $7k, if the pistons and rods are re-useable you will have change left over.

I suggest you go and speak to Greg at pro-engines in Queanbe-hole

http://www.proengines.com.au/packages.html

wow i have never even heard of that place before. might see if i can duck out from work tomorrow to go have a chat to this guy.

id be more than willing to pull the engine out with a few mates but the main problem i have is that i have nowhere with enough room lol

current engine has a REALLY bad knock. had ESP have a look at it and they said definitely a rebuild and to budget for between 12-15k. current engine was rebuilt about 25000k ago in melbourne, so forged internals, r33 crank, n1 oil and water pumps, and also n1 block, reconditioned head. unfortunately not being incredibly mechanically minded, at least when it comes to the internals of an engine, i'm relying on what places like ESP are telling me

:/ Drew.

Honestly if your block had the above done I'd go straight to rebuilding it. Check the side of your block to confirm it is an N1 first.

People who spend money on these would normally have the rest of the job done properly too. Makes me surprised it's blown so soon.

It's either had a real flogging/lack of basic maintenance or wasn't built quite right.

The obvious down side to you is the time your GTR's off the road.

The upside is you have just about enough to get the rebuild done properly and the time to get the rest while it is being rebuilt.

As Andrew said try and get the block out with a few peeps off here and save yourself a few grand.

BTW. 12-15 grand is a bullet proof build with everything replaced and nothing re-used.

You have put some really good thought into your options already. Just thought I'd sum it up.

Cheers Richard, I really appreciate the time you guys have spent helping us out.

I've got receipts for the rebuild that total nearly 20 grand so we were very shocked when ESP told us 12-15 grand to rebuild it. I'm hoping to get out to the place in queenbeyan that zebra suggested last night to have a chat with them. So we'll go from there.

Unfortunately I don't have the space or know anyone who has the space for me to be able to pull out the engine so we may have to factor that into our costs of the rebuild

If your looking at getting your engine rebuilt I'd also look at sydney. As there is a wealth of knowledge up there as well, and I think your limiting yourself if you don't at least consider getting it done up there. CRD seems to have a good rap up there. Having sorted out a lot of GTRkats issues with her rebuild.

I've definitely thought about that, even to the extent of talking to CRD on the phone. The main problem we faced though was actually getting the car there as we don't have something capable of towing a car trailer. That's the only reason we've decided to get it done in Canberra.

Speaking of Canberra, I went out to the place that zebra suggested and it didn't look like it had been used in a while. The front gate was open but everything else was shut and nobody responded to my knocking or phone calls. So I went and had another chat to Glenn at ESP and the car is now going into the shop next Wednesday to have the engine pulled and stripped down to find out exactly what needs to be replaced/fixed and how much it's going to cost.

If anyone on here has the space, time and know-how between now and then to help me pull the engine out then let me know! Lol

Seriously though....help!

Keep the advice coming guys.

Cheers,

Drew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...