Jump to content
SAU Community

Recommended Posts

r34 and r33 both have 370cc injectors, i had my r33 at 12 psi with the same turbo by the sounds of it (3071 with the vg30 rear housing)

i had much the same mods as you and it had 200rwkw at 12 psi and was still running rich, so 14 psi should be ok i'd think

I haven't heard of many people safely pushing more than 230kw with stock injectors, at 14psi hard to say as I don't know what turbo you have but you will probably be ok.

If you are running stock AFM you will be close to maxing that out as well.

I just assumed he was getting a retune... waste of time if you use stock ecu imo.

edit: nistune is next, the car will run like an absolute dog without a retune, get a 10psi spring and leave it at that, even 10psi will have it coughing and spluttering though with the bigger turbo.

Edited by Rolls

Id say the fuel pump would run out before the injectors.

If your tune is conservative then you will be running very close to maxxing them out..

My stock turbo on 10psi with Walbro pump maxxed out the injectors easily when it was tune with a Link G4.

It's kinda hard to say whether injectors should be fine or not without any specific info about the turbo. But my advice would be to get a package of Z32 AFM, injectors and fuel pump before bolting it all together. These three cost around 1000$ for a new AFM, a set of siemens 650cc's and a Deatschwerks pump.

Yea, highflows may be okay, may be not, depends on how the've been modified, but almost always they're worse that injectors that come from factory with a designed flow. There are some good inexpensive offers for R34 injectors, starting from 50$/inj or there abouts. Search, there are some details about injectors suitable for NEO posted by forum members Simon-S14 and I think urtwhistle.

Jecs used to be an in-house electronics manufacturer for Nissan, e.g. my AFM has "made by Jecs" badge on it, so it might be a highflowed set of stockies.

Do you have a link to the said set of injectors?

Edited by Legionnaire

simon uses siemen deka injectors, the 3/4 length 60lb injectors are a direct fit but will just need to rewire new plugs. you can get this from the states the cheapest.

im runing 600cc high flows and havent had any fuel or tune issues. currently making 245rwkw and soon to be 300.

speak to PJ on this forum, i got them down thru him.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...