Jump to content
SAU Community

Recommended Posts

Hi guys,

I know if you buy a car which is older than 6 years, or you register a car from interstate, or your registration has been expired for more than a year you need a roadworthy.

But, is there any other time?

Sort of like how UK has the MOT system where cars older than X amount of years need to get checked every 2 years

Link to comment
https://www.sau.com.au/forums/topic/384320-roadworthy-certificates/
Share on other sites

Spetz I dont really do understand.

The cop who gives you the defect can either choose to write down that you have to go to Dickson or not. They either say you go there or another station or one of your choice from what I know

When my car got defected, the cop ticked that I can take it to any inspection station as it was a minor defect. So I went to an inspection station in Fyshwick and the guy started looking over the car etc, then eventually looked under a hood and realized the car had an engine conversion, at which stage he gave me the papers back and said it has to go to Dickson because a car with an engine conversion is classed as "modified" and HAS to go through Dickson each and every time.

The wording of the RTA.ACT site is Crap and very misleading.

Modified cars, will mean cars that are required to have an engineering cert, Spetz as you found your lancer falls into that catagory.

there are two types of modifications

Basic/Minor/Common mods - ala exhausts, wheels etc etc (not including turbo upgrades) can be done at any approved inspection station

and

Extensive/Significant mods - ala engine swaps, brake upgrades etc etc that require an engineering cert will need to go through Dickson

My advise, make EVERYTHING look as standard/Factory as possible, if possible

Edit - See here

http://www.rego.act.gov.au/assets/PDFs/Light%20Vehicle%20Modifications%20in%20the%20ACT.pdf

and here

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/vsb_ncop.aspx

Well I will need to go over the pits regardless and get an engineers certificate as they no longer accept my NSW one.

I was mostly curious as to whether I need to return every 1 or 2 years for a check up

Thank for the help guys :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...