Jump to content
SAU Community

Recommended Posts

Hi Guys,

I have a 1996 skyline which i purchased a few months back and though it was great in the beginning am looking for the extra grunt.

It is a standard stock turbo, automatic r33 with a turbo timer and some minor body work.

I am looking for some advice on what I can do to modify my car to make it go harder and fell like i can beat everyone on the roads am tired of these Hyundai Elantra's thinking they can keep up with me.

I love the pick up the car has got but I want more and a steady increase in power and also feel that though am at a 100 or 120k's I can still get a lot more out of the car If I choose

Any suggestion will be welcome am currently starting off on a lighter budget till i know how far i wish to go.

oh by the way I live in Perth so any suggestions on affordable performance shops are greatly welcome.

Edited by musaGT2.5
Link to comment
https://www.sau.com.au/forums/topic/384676-modifying-my-skyline/
Share on other sites

For work check out the Consolidated workshop thread, plenty of guys around familiar with R33s!

1) Coilovers - Drop the car lower and make it handle better.

2) Good wheels and tyres - These will fit nicer now you have done the suspension, get a set of nice fitting Jap wheels and some sticky rubber to help handling and stopping in the wet and dry.

3) Exhaust - 3" from the trubo back. This will make the car sound nicer and give it a few extre rwkw.

4) Front Mount Intercooler - They're bawss and look killer

5) Upgrade Brakes - New pads and slotted rotors will help you pull up nice and quick!

After all that you will be broke and can then spend a few grand on adding a clutch and shifter!

Thanks for that.

Yeah i looked at the thread, it was helpful.

what would you reckon the best place to go and get most of this stuff done would be at the moment.

Allstar FTW :D

But seriously, you should probably head over to the Forced Induction section and have a read through the guide. It's not good heading into these things without having some idea of what you want.

Thanks for that.

No worries brah!

what would you reckon the best place to go and get most of this stuff done would be at the moment.

Well let me tell you...

For work check out the Consolidated workshop thread, plenty of guys around familiar with R33s!

1) Coilovers - WA Suspensions, these guys are totally killer!

2) Good wheels and tyres - Import Monster for 2nd hand Jap wheels and Jesse Streeter for new wheels. Then see my mate Damo at Tyrepower for some awesome tyre deals!

3) Exhaust - Kermit Engineering, he talks alot but is a nice guy

4) Front Mount Intercooler - Japanese Performance Centre. Denzo is mental but good. (May also have some wheels)

5) Upgrade Brakes - See #4

Major service, then spend 6 months working ot what you want the car for i.e streeter/drags/track before you waste you money on mods that are useless or will need to be upgraded again, work out how much power you want and where you want that power.

First mod though would be upgrade brakes, best tyres yo can afford, and maybe some sway bars, theres $2000 to start with.

Remember that you lose most of (90%) the money you put into it when its time to sell it, food for thought.

  • 1 month later...

Thanks for that.

And what place do you suggest is a reasonable place to get my car serviced i have been taking it to my regular mechanic but now am starting to think he might be doing more bad than good need people who actually know about skylines.

Major service, then spend 6 months working ot what you want the car for i.e streeter/drags/track before you waste you money on mods that are useless or will need to be upgraded again, work out how much power you want and where you want that power.

First mod though would be upgrade brakes, best tyres yo can afford, and maybe some sway bars, theres $2000 to start with.

Remember that you lose most of (90%) the money you put into it when its time to sell it, food for thought.

Edited by musaGT2.5

1.As stated above

2. Please dont race people on the roads it makes the rest of us look bad.

3. After a few mods do a driver training day

4.Draiver training

5. Repeat #3 & 4

6. Profit?

hows the R32 golf going?

work out how much your going to want to drive this car too because it's all well and good to spend 10k on it and get like 400rwhp for example but you may want to take in drivability as well

if this is the only means of transport for you may want to go with what'll make it handle better than give out a good reading on paper, while retaining on road driving but this may not be to bad if you leave the auto in it

You're going to need NOS, two of the big ones, by tonight. And don't forget neons and stickers. Makes everyone realise the car means business and they'll be scared to race you, but just in case you come across somebody else with stickers and neons, the NOS will ensure your victory.

You're going to need NOS, two of the big ones, by tonight. And don't forget neons and stickers. Makes everyone realise the car means business and they'll be scared to race you, but just in case you come across somebody else with stickers and neons, the NOS will ensure your victory.

I love this man, oh so much right now

hows the R32 golf going?

work out how much your going to want to drive this car too because it's all well and good to spend 10k on it and get like 400rwhp for example but you may want to take in drivability as well

if this is the only means of transport for you may want to go with what'll make it handle better than give out a good reading on paper, while retaining on road driving but this may not be to bad if you leave the auto in it

hey bud,

Going well but no mods as of yet. still love the fact that most people have no idea what it is or is capable of. Stuck to the ass of a BMW Z4 M on sunday till he started to speed, was the only way he got ride of me. Dont think he was too happy about that. lol

Also the reading on the paper means 2 tenths of f-all!! if you have 400killer-wasps but normal suspension then someone with a better suspension setup will beat the living sh!t out of you. Look at the work shop thread, go speak to the pros about what you want and LISTEN to their advice! then do more driver training, cant get enough of that!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not a problem at all Lithium, I appreciate your help regardless. I've pulled a small part of a log where the target pressure was 28psi and it spiked to 36.4psi. I've only just begun using Data Log Viewer so if I'm sending this in the wrong format let me know.
    • Sorry had a bit of a week and haven't had heaps of time to follow this, so apologies if I've missed something - any chance of showing a log with the rpm, turbo speed, MAP, and wgdc all in one view? Definitely an "interesting" problem, and while it's definitely worth noting that there was a similar issue with the twins I'd not completely put all bets on the root cause being the same thing.  Keep an open mind, follow the data.
    • I built this engine approximately 12 years ago so my own head (brain) is a little grey on the exact hardware in the RB head, however what I recall is. Stock RB25 NEO TURBO Intake Camshaft HKS 260 degree Exhaust Camshaft (R34 GTR) RB25 NEO Turbo Springs  I ported/removed the exhaust stud humps found in the RB25 head so theres less turbulence but it wasn't ported/polished properly, just a hump removal. I've attached two pictures of the before and after to illustrate.     The ECU gets its boost reference from the nipple on the rear of the head on the intake side, behind the fuel rail. The wastegate gets its boost reference from a nipple on the cooler pipe immediately after the comp cover.  Could a decent pressure drop across the intercooler cause the wastegate to be seeing a higher PSI than what the ECU is seeing, and thus it can't control it accurately and quick enough?   We ran a line to the actuator and watched it open and close using an air compressor, while we didn't have a gauge on the line to see when it was cracking open, it was opening smoothly.  I just removed the gate now and even though the documentation says you need to open it in a vice due to preload (which I did), there wasn't any preload on the cap, which is something we noticed straight out of the box as well when new. This silver cap internally is threaded to the actuator rod that runs out the bottom of the straightgate. Not sure how I'm supposed to get this spring out to be frank.. Potentially but everyone else doesn't appear to have to stop at 500kw because of 6boosts design.  I would, but I think I'm getting to that point where if I'm going to do the head and make another 100kw, then I'm going to need a fancy gearbox and quite a few other things and 10k becomes 20k becomes 30k within a few months. I'm not necessarily sold on the idea just yet that the head is restrictive at 4000rpm (and what.. 300kw?) and yet doesn't seem to be restrictive at 7000rpm when it's making 500kw, however I'm obviously not closing the door on that theory.
    • Yeah - Half the problem is I know this sensor actually goes to 150C.. I'm pretty certain it is min of 11C. So still more data required I suppose. It's really quite hard to get the oil temp to 100+ then immediately pull over and take a reading before the temp drops. Annoyingly I suppose the range I really 'want' is likely 80 -> 120C. TBH the ecu can't really *do* anything with it, and the gauge itself is very visible... ...but you know how it is.
    • My EFR 8474 Black, made 800awhp on a roller dyno. at 25-26psi. E85. Shaft speed was around 106,000rpm 1.01 rear. The rear is maxed.  6 boost Turbosmart 60mm gate 3.5inch exhaust  Head is worked to the shithouse. Bain racing. VCam. 272 exhaust. RB28 - RB26 foundation.  You have an intake issue. Start getting proper data and I mean go back to the simple things.  - Pressure test your intake - Block off the Turbo BOV, you don't need it.  - Test pressure before and after your intercooler If your head is pretty stock, that is your issue. Especially if it is NA.  Take it off and spend $10k on it. 
×
×
  • Create New...