Jump to content
SAU Community

Recommended Posts

Time for a new Toy.

Skyline R33 series 2 96 M spec

Fresh engine, done 4,000 km, ACL bearings, ACL metal head gasket, std rods and pistons, gone over from top to bottom by Miltons.

Extreme carbon single clutch, done approx 5,000 kms.

Low k's gearbox just fitted.

Kaaz 2 way diff.

Tein coilovers.

Whiteline swaybars.

whiteline camber kit in rear.

castor kit in front.

fresh trw pads and fluid to brakes.

HKS high power cat back exhaust,

Garret GT3582 Internal turbo.

High mount Extreme steam pipe manifold.

Custom Stainless dump pipe into Stainless cat pipe.

Plazmaman forward facing plenum with Plazmaman cold pipes.

Hybrid front mount.

Big Alloy Radiator with Billion hoses.

850 cc sard injectors,

Turbosmart 1200 fuel pressure reg.

Custom fuel system 044 intank feeding swirl pot and 2x044 fedding engine, aero fittings, speedflow check valves, return line and feed lines done with

teflon braid, no smell.

Apexi power fc ecu, can supply various tunes, E85, 98 etc.

Greddy profec 2 boost controller.

Alpine mp3 head unit, front and rear splitts.

Alarm system.

KR4 Silver.

GTR rear wing.

18" Rays Prodrive wheels, very rare. Toyo Proxes 4 on front and Kumho Ku36 275 on rear.

330-380 rwkw depending how brave your feeling.

$15,000 ONO

Mobile 0468353923

Serious offers please, has taken alot to get car to this level, no joy rides thanks. Located in SA.

post-34685-0-30992200-1323050199_thumb.jpgpost-34685-0-43774500-1323050218_thumb.jpgpost-34685-0-46033600-1323050238_thumb.jpg

post-34685-0-37673600-1323050263_thumb.jpgpost-34685-0-28654500-1323050363_thumb.jpgpost-34685-0-03908700-1323050437_thumb.jpg

post-34685-0-18271800-1323050457_thumb.jpgpost-34685-0-41792200-1323050485_thumb.jpgpost-34685-0-24871900-1323050507_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/384900-skyline-r33-gtst-96-m-spec/
Share on other sites

What I've notice, all the well built, well maintained R33s that are cheap are everywhere else but Sydney. Everyone in Sydney just wants stupid money for a near stock R33.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...