Jump to content
SAU Community

Eastern Creek 03/10/2002

Silver-Arrowz

By Silver-Arrowz,
in Events Archive

 Share

Recommended Posts

Merli Grand Master

Merli

Posted
Posted

Jon...

I only timed my second session... I managed a 1:59, and I was taking *all* the wrong lines... turning in way too early on turns 2, 5, and 7...

I went out with Paul, and he showed me the proper lines... I went out for the last session, and even though I was held up on *every single lap*, I felt that I was going much MUCH faster... doing at least 1:57s...

I pitted at the end of the session and excitedly reached over for the lap timer, and I saw it's screen was off....

F U C K! I forgot to turn it on :D

Oh well, so the best timed lap I got was 1:59, but I know I did much much better than that in the last session. I'll have to prove it next time ;)

Anyway... 1:59 for the first time at EC isn't too shabby.

nissaner Mentor

nissaner

Posted
Posted

1:57-59 is very fast especially if its ur first time at ec... i managed to get 2:05... its my first time ever on any track so yeah hope i will improve on this next time ;)

do u remember overtaking me at one session?? i remember daniel (the blue station wagon wrx guy in group A) saying , "i like his lines, can u follow him??? " watching u taking corners... can't remember the no of corner... do u remember when this was? was this b4 u learnt lines or after ??

ur car looks darn sexy mate... congrat on ur purchase once again... :D

Merli Grand Master

Merli

Posted
Posted
Originally posted by nissaner

1:57-59 is very fast especially if its ur first time at ec... i managed to get 2:05... its my first time ever on any track so yeah hope i will improve on this next time :D  

do u remember overtaking me at one session?? i remember daniel (the blue station wagon wrx guy in group A) saying , "i like his lines, can u follow him??? " watching u taking corners... can't remember the no of corner... do u remember when this was? was this b4 u learnt lines or after ??  

ur car looks darn sexy mate... congrat on ur purchase once again... :D

I wasn't running full boost because I had Optimax in the tank, and my car always pings when I use Optimax ;) I'll make sure I have a full tank of Mobil or BP next time, so I can regain those 50rwkw I lost by turning the boost down :D

I'm not sure what session it was when you were following my lines... I have done a lot of trackdays, so I know basically what lines to take, but to get them 100%, it only comes from lots and lots of laps, which Paul (Oz97GTR) has, so he was able to show me the optimal lines to take for the track.

I was basically turning in too early, and apexing a little early, which slowed my exit speeds... During the last session when I was driving the correct lines, I was held up on every single lap, so it was possible that you were able to follow my lines, as I was going quite slowly...

I'll take you out for a few laps next time, or hop in with Paul who knows the track like the back of his hand... Your lap times will drop dramatically...

I do remember coming down the straight one time, and I couldn't catch you... I was thinking "DAMMIT!!! I NEED TO TURN UP MY BOOST NOW!!!!" :D

My car was dynoed at 275.8rwkw @ 1.2 bar on SAS Dyno... (I was running 0.8 bar on the track) Your car made around that at all 4 wheels right? Or even more than that if I remember correctly...

nissaner Mentor

nissaner

Posted
Posted
Originally posted by Merli

My car was dynoed at 275.8rwkw @ 1.2 bar on SAS Dyno... (I was running 0.8 bar on the track) Your car made around that at all 4 wheels right? Or even more than that if I remember correctly...

hahaha, andrew, i wish mate!!! my car was dynoed on 2wheel dyno, so that 376hp was at the rear like i stated honestly in the post way back... (don't make me look like a big horsepower bullsh1t artist... haha :D ) mine was at 1.2 bar as well... so thats about 280rwkw right???

but the thing is john from unique took my car for a drive , and he said there is noooooo bloody way that my car has 280rwkw... he reckons about 220... i was kinda dissapointed but oh well... ^^

see u at the track mate!!~!~!

Merli Grand Master

Merli

Posted
Posted
Originally posted by nissaner

hahaha, andrew, i wish mate!!! my car was dynoed on 2wheel dyno, so that 376hp was at the rear like i stated honestly in the post way back... (don't make me look like a big horsepower bullsh1t artist... haha :D ) mine was at 1.2 bar as well... so thats about 280rwkw right???  

but the thing is john from unique took my car for a drive , and he said there is noooooo bloody way that my car has 280rwkw... he reckons about 220... i was kinda dissapointed but oh well... ^^  

see u at the track mate!!~!~!

hahaha... sorry mate... my bad ;)

Yeah, 220-230kw @ wheels would probably make more sense for the mods that have been done to the car... Would make sense too, as we were about the same down the straight, and I was running 0.8 bar, so I would have been at about 220rwkw...

red900ss Grand Master

red900ss

Posted
Posted
Originally posted by Merli

I wasn't running full boost because I had Optimax in the tank, and my car always pings when I use Optimax :D I'll make sure I have a full tank of Mobil or BP next time, so I can regain those 50rwkw I lost by turning the boost down ;)

If you take the M2 there's a BP with Ultimate 98 just after it ends in Seven Hills. Only 5 or 6 km to E/Creek from there. Saves having to use Optimax.

lou15x Community Regular

lou15x

Posted
Posted

i've nvr been on eastern creek once but i'm keen since it's during my uni break... i was actually planning to head down to wakefield on either of 1/2/3 oct as these are open days... i've heard eastern creek is a higher speed track relative to wakefield? i'm a novice so that is a bit of a concern doing high speeds...

Silver-Arrowz Grand Master

Silver-Arrowz

Posted
  • Author
Posted

Go out on Wakefield first as it's an easier and more user friendly track. Then come out to EC and one of the regular guys can show you around. If you are confident, then you can get out.

When you are new to any track, don't go out there with an attitude of "I have to be faster than this guy". That'll put you in a dangerous situation.

Silver-Arrowz Grand Master

Silver-Arrowz

Posted
  • Author
Posted

Looks like I'll be doing the calling to Motoconcepts for spots. I need certain numbers people.

Doesn't look like a lot this time. What's wrong? This the last drive day until 19th of December people...

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      ECU sees many times the speed than speedo does (R34 swap)

      By Kapr · Posted

      Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • albyz34gt
      34 de+t conversion using s2 stagea automatic transmission, engine harness and ecu

      By albyz34gt · Posted

      Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...