Jump to content
SAU Community

Recommended Posts

Have some goodies that have come out of the GTR for sale. All in full working order, just selling due to upgrades. Some pics included, will take more during the week. Will post at buyer's expense but would prefer pickup esp for the bigger items.

1. HKS EVC 4 Boost Controller (This is sometimes listed as an EVC 5 in the US). Good used condition, $400 SOLD

2. HKS CAMs - Step 2, 264 in, 272 ex (Note, these are not drop ins, need upgraded valve springs) Perfect condition, $600 SOLD

3. Standard R32 GTR intercooler $100 SOLD

4. HKS Upgraded Actuators. These came off my HKS GTRS turbos and did hardly any k's. I believe that they have an adjustment of boost level 0.8 to 1.1 bar or thereabouts - $250 SOLD

5. 18 x 9.5" Sparco wheels with rubber +23 up front for caliper clearance and +22 with bigger dish up back. Purchased from Import Monster to be my track wheels and had them on my car for about 5 minutes before finding out they didn't clear my front brakes $1000 $650 (Link on Import Monster http://www.importmon...roducts_id=1087) SOLD



6. 17 x 9" White sparcos (will go out and check offset later when I get pics) but a lot of you have seen them on my GTR. I love these wheels (and it pains me to sell them!) but they also don't clear my brakes. Restored and resprayed white, all good condition except for some gutter rash on one where I had a retarded parking moment - very easily repaired. No rubber on these... $750

th_P1010011-1.jpg th_P1010044.jpg

7. Pair of R32 GTR standard Sumitomo front calipers. Good condition for their age, have pads with reasonable amount left on them (unsure what the pads are). $200 SOLD

8. Twin HKS GT-RS turbos packaged with upgraded Garrett actuators (were $400), Tomei dump pipes and Tomei manifolds $4000 ono. Whatever gaskets and bolts are left will be thrown in. All in fabulous condition, selling because I've finally bitten the bullet and gone for a big single.

th_IMG_2490.jpg th_IMG_2489.jpg th_IMG_2486.jpg th_IMG_2485.jpg th_IMG_2484.jpg th_IMG_2478.jpg th_IMG_2477.jpg th_IMG_2476.jpg

9. R32 GTR stock intake plenum painted black $150 SOLD

10. R32 GTR stock harmonic balancer $100

th_IMG_2493.jpg th_IMG_2492.jpg

11. R32 GTR water and oil lines $100
th_IMG_2483.jpg

12. Brand new HKS Oil Pump for RB26 $1600
th_IMG_3263.jpg th_IMG_3262.jpg

13. CRD Race Head including cams - PM for specs $8000 - SOLD

14. Tomei 2.8L Stroker used but in great condition - $3500 sitting in cracked block, selling because I bought a complete motor SOLD

15. Trust 115mm Intercooler, near new, great condition some minor stone dents - $1200
***For this price I will throw in the Trust hard piping kit ($600 new inc shipping!) which minus 1 or 2 silicon joins but otherwise complete****.
This model shown at RHD Japan http://www.rhdjapan....-hg-bnr32-26959
SOLD

Link to ad in general FS section also... http://www.skylinesa...-bits-for-sale/

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/385480-r32-gtr-bits-for-sale/
Share on other sites

For all those that are asking, the cams are being sold because I was looking for more power. They saw me happily to 400kw and sounded amazing in the car, I loved the lumpy idle from the different stages.

Will be adding a few more items to the list in coming weeks including a Trust 115mm frontmount, HKS fuel rail and HKS 800cc injectors.

My garage is getting too full, buy my stuffs!!! :)

How much rubber is left on the 18's? I imagine you're running a decent brake setup for the power you've got, so biiiig calipers?? I might upgrade brakes in the future but won't be chasing the power you are so won't need anything so monstrous... would the 17's and 18's your selling both clear a brembo setup? I don't know if they're bigger than standard ones anyway. I was looking for R33 GTR wheels (coz they're light and forged) for around $750 but one of your sets could do the trick. And how long were you running the boost controller? Thanks :rolleyes:

Heaps of rubber left, I can take some pics for you. Yeah I have the AP big brake upgrade on the fronts... Reminds me I should name a price for my stocky calipers and put them up here! :thumbsup:

You're welcome to test fit, I'm pretty sure that both sets of wheels would clear the brembo setup, there really was only a bees dick in it with both sets not fitting over mine.

I was running the boost controller for about 6 months and someone else had it in their car for similar amount of time before I bought it.

Here's some closeups of each of the tyres. There's some minor camber wear and a small amount of cracking - cracking was there when I bought them and hasn't worsened. Make sure you check up the closeups on the import monster add, shows the gutter rash that's on the wheels. They're by no means perfect, I was intending on having them sanded back and powdercoated.

th_IMG_1919.jpg th_IMG_1918.jpg th_IMG_1917.jpgth_IMG_1916.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...