Jump to content
SAU Community

Recommended Posts

Wrecking Nissan Skyline R33 4 door sedan automatic

parts that are available:

>complete front and rear brake/hub asssebly $500

>front mount intercooler kit $200

>cat back exhaust $200

>front bumper with indicators and spot lights $250

>rear bumper $150

>head lights $150 each

>boot lid with spoiler grey in colour $150

>tail lights $150 pair

>front strut brace $50

>front guards grey in colour but suit respray or drift $100 pair

>rear pods $50 pair

>rear diff/cradle $300 might separate

>auto 4 speed trans $300

>tailshaft $50

>If you're after anything else feel free to contact me as I might have it!!!

>You can call me on 0421072135, Andy.

>Please dont txt me as I wont get back to you!

Edited by SAKS
Link to comment
https://www.sau.com.au/forums/topic/385813-sa/
Share on other sites

Hey mate what colour is car?

Do you have door cards(what condition?)

rear boot lining and carpet?

Passenger side tail light?

Only after really good condition

I'm from melb and may be driving to mildura to adopt a dog next week(wouldn't happen to live close lol haha)

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6155448
Share on other sites

Hey mate what colour is car?

Do you have door cards(what condition?)

rear boot lining and carpet?

Passenger side tail light?

Only after really good condition

I'm from melb and may be driving to mildura to adopt a dog next week(wouldn't happen to live close lol haha)

hey got only tail light but preffer to sell as a pair.. and i live in Adelaide.

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6155863
Share on other sites

Do you have the standard wheels mate? If so, how much?

i certanly do mate, however on two of them tyres are ok and the other two not so good.

im after $150 for them.

Also have some A-Tech 17s if interested, two tires also good while the other two not so good.

$450 for the set.

post-87705-0-05342700-1324367665_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6159674
Share on other sites

Also have available front Tein HA coilovers and rear struts with king springs $400

r33 radiator $50

r33 green sticker/label air flow meter (AFM), comes with a plug and mounting bracket $100

r33/rb25det engine mounts $40

r33 castor arms with offset caster bushes $50 pair

r33 engine x-member $50

r33 lower control arms $50 pair

bosch 040 fuel pump comes with fuel pump assembly for r33 $100

r33 series2 2door LH side guard (white) $100

r33 series2 both doors with no trims (white) $75 each

r33 2door back window $200

and a set of A-tech(MB Weapon) 17in wheels in bronze colour, two tyres are good and the other two need replacement $450

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6159710
Share on other sites

Also got genuine grill unsure how the color is called but its dark gray.. One clip is missing - $40

And BENDIX ultimate front brake pads been on a car only for a week - $100

Edited by SAKS
Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6160024
Share on other sites

Hey mate does the front mount kit come with the actual cooler and can u post up some pic or message them to 0406702207

Yes, cooler piping, cooler it self, silicone hoses and clamps are all included. :)

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6175306
Share on other sites

Was this car in a crash or just being parted out?

Lower control arms are for the front or rear?

What sort of condition is the radiator in, bent fins etc.

Also interested in the front strut brace.

Where abouts in Adelaide are you.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6175588
Share on other sites

Was this car in a crash or just being parted out?

Lower control arms are for the front or rear?

What sort of condition is the radiator in, bent fins etc.

Also interested in the front strut brace.

Where abouts in Adelaide are you.

Cheers.

I've got all of the above, its best if you give me a call on 0421072135 for further details.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/385813-sa/#findComment-6175956
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...