Jump to content
SAU Community

Recommended Posts

Well I am moving to QLD in July, finally taking the step.

Odds are I will be staying in Brisbane with family friends until I find a job that will pay sufficiently for me to cover my costs.

I drive an A31 cefiro and will be taking this car over with me when I come.

Question is, would anyone be able to assist me in getting any work in either brisbane or goldcoast. I am willing to do anything work wise(within reason).

Look forward to meeting you guys when I am over

Link to comment
https://www.sau.com.au/forums/topic/38603-im-becomming-a-qlder/
Share on other sites

Queensland is the best state in Australia full stop :) I made the move in December from Victoria (eek), and haven't looked back!

Can be hard to find work when you first move up, and I'll admit i was unemployed for about 2 months, but if you're keen and speak to enough people eventually you'll find something. It all works out in the end.

Well I am moving to QLD in July, finally taking the step.

Odds are I will be staying in Brisbane with family friends until I find a job that will pay sufficiently for me to cover my costs.  

I drive an A31 cefiro and will be taking this car over with me when I come.

Question is, would anyone be able to assist me in getting any work in either brisbane or goldcoast. I am willing to do anything work wise(within reason).

Look forward to meeting you guys when I am over

Is it just to be near me? *flutters eyelashes*

Oh and I do believe previous threads have reached the conclusion that a cefiro is _NOT_ a skyline. And now you know.

Its ok summoner, I'm on your side. *random glares at other people*

I'll give the cefiro a go in brutis. He's tasted nissan blood and wants more. (course, he got whupped, but thats hardly the point)

Andrew, old brutis got beaten by a sigma.... :)

But yeah, if you a forklift ticket, you shouldnt have too many probs getting something over here.

A 2.6L sigma with a turbo the size of a small african nation strapped onto it! Damn thing took 4 strong black men to lift into the car and the careful whipping and direction of a trained midget to get it all lined up and even fit in the car!

... And as a conclusion, your honour, I draw your attention to said sigma the very next week with a blown engine whereas Brutis (exhibit A) is still going strongly many months later. I have no further questions your honour, and rest my case. *sits down to applauding*

A 2.6L sigma with a turbo the size of a small african nation strapped onto it!  Damn thing took 4 strong black men to lift into the car and the careful whipping and direction of a trained midget to get it all lined up and even fit in the car!

... And as a conclusion, your honour, I draw your attention to said sigma the very next week with a blown engine whereas Brutis (exhibit A) is still going strongly many months later. I have no further questions your honour, and rest my case. *sits down to applauding*

You were alone most of today weren't you?

Welcome Mark! It'll be great to finally meet you after many years of internet chatting :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...