Jump to content
SAU Community

Recommended Posts

Be mindful the 5870 will be "brought down" to the 5850 speed.if you CF them together. It does not "balance".

And overall you'll then loose a little more performance as crossfire is never linear increases/gains as it appears crossfire backs off a bit more with two cards that are not identical.

plug them both in put all associated power cables on and add a crossfire bridge cable

crossfiebridgeas-sml.jpg<<Click

Got that but I'm trying to work out what needs to be plugged into the othe gfx card because I can't see the same plugs spare that are in the current gfx card

And what pin outs do you have over the 2 cards?

Without know the brand, its hard to tell. Diff brands of the same card can have different pinouts etc.

at the moment i have 2 6x pins into the one gfx card and when i went to install the other gfx i evened it out 1 6x pin and 1 2x pin into one gfx and same with the other, and when i went to turn it on

it was making a constant beeping sound and there was no display

ok took my pc to pc diy after work today, and they said my pci express slots are too close to each other so my gfx would over heat. so for now im just going to reformat the computer (fun) and hopefully it will speed it up abit, also got them to over clock it safely

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...