Jump to content
SAU Community

Recommended Posts

Fairly sure its just the red stick which sits on the ECU kick panel. When I was in the market for a R33, I found 4 cars which had these, almost convinced me to buy the car lol just to say Ive got a flare!

Yeah guys its just a red flare :)

$100 bucks because all the others that have been for sale have been around that.

Anyone who wants pictures just pm me your mob number and I will send one or two through :)

screw you guys! i had like 8 of those when i went to the wreckers and took them out of the half cuts!!! i used them all for some fun. i could have been 800 bucks richer!!!!!!!

screw you guys! i had like 8 of those when i went to the wreckers and took them out of the half cuts!!! i used them all for some fun. i could have been 800 bucks richer!!!!!!!

I don't understand why they cost that much when you can buy a survival kit for much less and the flare is included :/

I really wouldn't pay $100 for it. I'd give like... $30 max. They really aren't that rare. It depends on who imports the car and what their standard is on getting it complied etc. Alot of the privately imported skylines Ive seen have the flare, while the more commercial ones(a few of the dealers for import cars) NEVER have the flare. Its not the flare that shoots into the air either. Its the flare which just glows red at the end in your hand so if you have been driving on the mountains of japan and happen to fall off a cliff face on a snowy day, you can use it to signal searchers.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...