Jump to content
SAU Community

wheres all the nice cars ooo and where can i get 98 octane feul


Recommended Posts

Was talking to a local shell rep and he said they are trying to get optimax at a couple of servos from the pump, but he said that it looks like it wont happen until lrp is banned(these pumps will be converted to accept optimax).  Maybe a petition would help, even if one servo has lrp and the one up the road has optimax instead?

Was told the same thing by the Shell people up here as well! Was also told that because Shell and Caltas share deports (Caltas uses Shell in the Nth and Shell uses Caltas in the Sth) that it would be even less likely that Optimax will make it to Tas cause Shell didn't want to share "special blend". I rekon a petition would be a good idea also.

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Why don't we get a bunch of performance car owner guys to Lease an old service station, and have 2 pumps running 98 octane or better fuel.. There's a business proposal...

I wouldn't say my car is performance at the moment though, so That counts me out :)

hmm which is why every servo in victoria has it??

me and phat_r33 went over a year ago today, down near evolution R and i swear there was 8 servos within a block each and everyone had optimax at 80 cents and all had at least 4 optimax bowsers

Why don't we get a bunch of performance car owner guys to Lease an old service station, and have 2 pumps running 98 octane or better fuel.. There's a business proposal...

I wouldn't say my car is performance at the moment though, so That counts me out :)

I've got a servo, unfortunatly it's leased out for the next 10yrs or so, and dosen't look like they will be getting 98 in a hurry, but at least I have a shed to play in!

Well, yesterday I wrote this e-mail to shell:

Hey there,

Just wanting to enquire about your optimax product. As a Tasmanian, I've found that in the last few years thre has been an significant increse in jap imports, etc. and as a result, the demand for your optimax fuel has incresed.

Has your company any plans for this fuel to be made avaliable at the pump in the near future? I'm sure that even if there was only one service station in the north and one in the south equipt with this fuel that it would sell really well(no one else sells 98 octane yet either).

Would a petition help to sway the decision, as there is in my opinion, demand for such fuel here.

As a reply I got this:

Dear Daniel,

Thank you for contacting Tell Shell Australia.

In reference to your enquiry, Shell Optimax, a high density/high octane petrol is currently only available in Victoria, New South Wales, ACT and Queensland. Optimax is the result of a unique refining process and currently can only be manufactured at our Geelong Refinery in Victoria. This means that there is limited volume. Shell wish to ensure that sites can be supplied consistently before expanding the distribution network. This causes us some logistics hurdles in providing the product to the rest of Australia.

Optimax's unique formulation also means its specifications are different than other unleaded fuels. Shell Australia always ensures we meet all State Government legislation, and this prevents us from selling Optimax in some parts of the country.

We are planning to complete many of the regional NSW sites and northern QLD as soon as feasible - if you wish to check where you can purchase Optimax before travelling, sites are listed on our web site www.shell.com.au or contact our Customer Service Centre on 1300 134 555. Please be assured that we are working towards having the fuel available nationally.

Kind regrads,

Tell Shell Australia.

I wonder what legislations would stop them from distributing the fuel from one state to another? Also I'm suprised they haven't started selling optimax in bulk as a replacement for premium, as its worth more per dollar?

i'll write to bp tonight. Good to see they answered all my questions too.... :headspin:

  • 3 weeks later...

Hey there. I work for Mobil, and was talking to my boss today about getting the higher octane fuel in Tasmania. The biggest hurdle seems to be guaranteeing a reliable supply of it, and also storage. He seems to think that it may be here the end of this year of next year as a replacement for LRP, and they would use the old LRP storage tanks.

Caltex's Vortex GOLD Premium which is currently 96ron, is soon to go up to 98ron.

Got a mate that works for caltex and saw the paperwork. Wont be too long. Not sure if that includes hobart though, assume so.

  • 1 month later...
Apparently there is an high powered r32gtr(Blue with carbon bonnet)getting around Hobart, which is running on barelled 98 octane fuel..don't know where he gets it from though.

Thats me i own the blue gtr. I run my car on 98 ron bp ultimate. I buy it in 200 litre drums.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...