Jump to content
SAU Community

I Have A Problem And Don't Know Where To Start

Jimmy_8472

By Jimmy_8472,
in Australian Capital Territory

 Share

Recommended Posts

Jimmy_8472 Proficient

Jimmy_8472

Posted
Posted

Hey guys,

just throwing this out there because i'm not sure what to do.

Just before Christmas i was driving home from work and my water temp gauge started spiking above normal along with my oil temp gauge with went just over 100 degrees.

i thought maybe the coolant or oil had run a bit dry and it was around 7000 k's since i did the last service, so i serviced it again, new oil, filter and coolant. and all seemed fine again. except i just got home from my brothers place and it's happened again. the water temp stays good for a while as the oil temp slowly creeps higher and higher even just cruising at 80kph then when the oil temp gets just over 100 the water temp spikes....

Could this be a turbo problem maybe?

Any ideas, or possible things to check would appreciated.

Thanks.

Jimmy_8472 Proficient

Jimmy_8472

Posted
  • Author
Posted

Maybe, but i changed the thermostat just under a year ago. it seems whatever it is, is causing the oil temp to go up first..

It's probably worth mentioning that there is was a couple of little backfires from the exhaust while the car was warming up before i left the house.

maybe need to check the plugs...?

Sinista32 Grand Master

Sinista32

Posted
Posted

Your on the right track. Read this it may help Link

and yep wouldn't hurt to check your plugs too. Buy the cheaper copper ones :thumbsup:

In summary - Water/oil temps are related and should generaly be around 85 degrees for normal driving

  • 2 weeks later...
Jimmy_8472 Proficient

Jimmy_8472

Posted
  • Author
Posted

Thanks guys, all sorted.

i put a bigger better radiator in and it's been fine since.

noticed a slight leak from the water pump too and installed a new one last week.

Now it's purring like a kitten again :D

Randon_I_Am Veteran

Randon_I_Am

Posted
Posted

I've got the same thing :(

But also my heater is being a bit funny, so I'm gonna try to blast out the coolant heater pipes that go through the firewall making sure there's no blockage in there. Then move onto a just jap radiator....

Trozzle Grand Master

Trozzle

Posted
Posted

I've got the same thing :(

But also my heater is being a bit funny, so I'm gonna try to blast out the coolant heater pipes that go through the firewall making sure there's no blockage in there. Then move onto a just jap radiator....

Have a look at the NSW member's discount thread on radiators, they actually look pretty damn good man

Trozzle Grand Master

Trozzle

Posted
Posted

I've got the same thing :(

But also my heater is being a bit funny, so I'm gonna try to blast out the coolant heater pipes that go through the firewall making sure there's no blockage in there. Then move onto a just jap radiator....

Have a look at the NSW member's discount thread on radiators, they actually look pretty damn good man

Jimmy_8472 Proficient

Jimmy_8472

Posted
  • Author
Posted

Good to hear its all back up and running.

How much did the radiator end up setting you back if you don't mind me asking?

I just went to Phillip radiator service and got a brand new GTR radiator (Core is twice the size of standard) and it was around $270.

i would have done a little shopping first but it was between Chrissy and new years so many places were closed and i needed to get it sorted quickly.

Jimmy_8472 Proficient

Jimmy_8472

Posted
  • Author
Posted

I've got the same thing :(

But also my heater is being a bit funny, so I'm gonna try to blast out the coolant heater pipes that go through the firewall making sure there's no blockage in there. Then move onto a just jap radiator....

Just out of curiousity Pat, what does your oil temp reach when driving normally (before you were having this prob)

It's just that mine is stable now but it settles in at around 92 degrees which is still slightly higher than i'd like it to be..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Komdotkom
      R32 Gtst - Track Car

      By Komdotkom · Posted

      Great pic  
×
×
  • Create New...