Jump to content
SAU Community

Shoujiki's Wtb Thread! For R34 Gtt

Shoujiki

By Shoujiki,
in Wanted to Buy

 Share

Recommended Posts

Shoujiki Proficient

Shoujiki

Posted
Posted

Hey guys,

Recently acquired one of these beauties and need some little things to get it up to scratch... most things are very small.

Here's the list.

- 2x Clips that secure the stock air snorkel to the front radiator support.

- 4x Clips that secure the lining in the boot / near the lights and side areas.. There those twist half out and pull kinda ones.

- 2x Clips that secure the plastic cover on the boot hinge.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- 2x Washer nozzles for the bonnet IF they are meant to be black normally .. (mine looked sprayed silver?)

- Nismo Clear side and front indicators.

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Billet Oil Cap

- My car has 2 red lenses in the doors for courtesy lights, but no lights/fittings behind them... does anyone have these fittings? What models had them hooked up?

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I know this is kinda wanky, but anyone have a kick panel flare? Mine's been removed! (wanted to make it all as original, not spending $100+ though...)

- One of those boot corner mounted sub boxes

That's all i can think of at the moment. Please let me know via this thread or PM if you have any of these or can help out in any way.

Thanks, Kurt.

Link to comment
https://www.sau.com.au/forums/topic/386923-shoujikis-wtb-thread-for-r34-gtt/
Share on other sites
rondofj Veteran

rondofj

Posted
Posted

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)

I also have the bottom right tray on the dash not hinged properly to the side and loose, and also have no lights/ fittings on the red door courtesy lenses... Hmmm dunno if its meant to be that way. Plus have clips missing in some of the boot trims as well..

Seems like people are just messy when doing work and don't put stuff back properly! Common thing with people that don't know how to work on cars and take care of them haha!

Yeah I'd say the courtesy lights are wired up for certain models. I'm sure the GTR has them in, as i've seen a few lit up. They must just use the same door panels. I'd like mine working though, be a nice touch.

Got a few parts already from some great members here, thanks so far!

So far have got :

- There is some type of solenoid at the back of the motor, mounted to a bracket, one electrical connection and 2 vac hoses to it.. i need one of these.

- Apexi or Nismo GT Radiator Cap

- Nismo Clear side and front indicators.

- A Nismo Gear knob .. the leather style/stitched ones. My stocky is showing signs of wear.

I also have had 2 offers for a flare (which i appreciate!) however there sold without the holder, mine has the holder removed, so I'd need that too. Around $50-60 is all I can swing to.

Bumparoo up you go!

Edited by Shoujiki
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)

Hey Redline GTR... Yeah i actually found all the clips for my boot and what i needed from a local wreck here in Victoria... he still has quite a few on the car so give him a bell ... he has a R34 wrecking thread . Suji is his username.

So i need these last few things:

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- I have the flare now, BUT, i need the "holder" part that screws to the kick panel itself .. anyone got a car that has the flare removed but still the holder?

- One of those boot corner mounted sub boxes

Thanks!

Edited by Shoujiki
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well

- Nismo Billet Oil Cap

- GTR Courtesy lights/brackets/plugs from the doors

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- One of those boot corner mounted sub boxes

Have sourced a flare and holder from an awesome member that gave me it for nothing! So, just the final things on my list left now above, anyone help out?

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!

- Plastic Trim that hides the screws that mount the driver side mirror, interior panel. Commonly where people put spllt tweeters. (mine has a busted clip)

Bump! Updated and removed parts I have sourced and now have. Added in one more interior panel, not sure what you'd call it but it's a panel that hides the screws for the drivers side mirror, its a triangle shape with 2 clips. Mine has 1 busted clip so need a new panel.

cheers.gif

Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted (edited)
- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace, Nismo perhaps .. show me what you have!">

Updated!

Edited by Shoujiki
  • 2 weeks later...
Shoujiki Proficient

Shoujiki

Posted
  • Author
Posted

Bump! Just need these last few bits!

- The tray the pulls down on the right bottom of the dash, mine is busted on one side and it doesn't hinge too well.

- Nismo Billet Oil Cap

- GTR Door Courtesy Lights

- A nicer strut tower brace

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...