Jump to content
SAU Community

Wiring up a turbo timer.. please help

[R31][Silhouette]
 Share

Recommended Posts

[R31][Silhouette] Contributor

[R31][Silhouette]

Posted
Posted

Hi Guys,

I've got an R31 series 2 Silhouette with Silvertop Rb20det.

Any idea how to wire up a HKS turbo timer? Anyone done this before..

The colours of the wires are Red, Green and Blue on one plug and two separate black and grey wires.

Any idea what these wires connect to?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/38722-wiring-up-a-turbo-timer-please-help/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Im assuming you dont have instructions!!!!

You will have to post the model no so someone else who has the exact same model can scan it and send them too you, cause different wire colours mean nothing, on different brands and models... Also if you have one with no instructions i hope you bought it from a very reliable source??? Cause theift is a supply & demand industry...

or

sorry to be hard there dude I just hate theives anyway, I had one of these and returned it because the HKS ones dont like alarm systems that disable fuel pumps and so on... Mate if you have the reciept still return it for an APEXI pen type TT. Much more user friendlly and like alarms systems....

NOTE: You can make the HKS unit work with alarms, but its more wiring than im gonna even try to explain... (I used to be an auto-elec)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      No ABS, no TCS, no airbags, no cruise control, no lane departure assist, no emergency brake assist, no orange lights in the mirrors (continuously annoying me in multi-lane traffic), no stupid rear view camera. I am the one responsible for where my car goes and how it does it.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Cheapest Jaycar one is only $65.
×
×
  • Create New...